Printable View
Here's the build I've been working on out here in Japan. It's changed from a simple Zstat 15" sub to custom enclosure and dual Xcons strapped to Crescendo 2Ks. It actually grew itself into something a tad bigger than I expected but it has been fun to put together. Shout out to @double 07 ; @gckless ; for helping me out. I had the pleasure of meeting gckless out in Japan and talking shop quite a bit. After a million and one texts, and plans @gckless ; he helped me put together something good.
It's been one heck of a challenge since I'm sourcing everything from back USA. Most of the Japanese run the big box brands like RF, Kenwood, Sony, etc. , so I decided to go with something different that will be in the end outstanding. The second challenge, is the vehicle of choice a Toyota Voxy. It's a mid sized van with good space for an install, but I had to do some mods to make the upgrades work like a bigger battery, etc.
Equipment:
Pioneer 9400BH
CDT front components with rear coax for fill
2 Xcon 15's
2 Crescendo BC2000Ds ( replaced a Hifonics 1700d)
1 MB Quart Onx4.125 (moving the planet audio out)
Excessive Amperage custom HO (current alt is 70a)
2 XS power D3400s
Knu Con wiring
New Dimensions /Stinger Volt meters
Custom Enclosure 8 cubes net 33hz
So here goes.
Stock Voxy
http://i450.photobucket.com/albums/q...ps9b692a2f.jpg
Glad to help ya bro. Just upset I didn't get to hear it before I left! I want vids for sure!
I got bored with it being the same as the others around so I put a set of used wheels (great deal at $300.00 for the set) and ordered some good ole vinyl wrap from Ebay.
http://i450.photobucket.com/albums/q...ps2e79e112.jpg
Wheels
http://i450.photobucket.com/albums/q...ps3597a45c.jpg
Onto the audio history.
Initially I was just planning something easy, 15" Zstat sub in a prefab, Hifonics 1700D, Infinity Ref door speakers paired up with the Planet Audio 1600.4. I decided to rip that out and go for the CDTs which are paired up with the PA for now (Onx4.125on the way through Amazon). I decided to sell the Hifonics and go with the Crescendo 2K and it performs very well. It kills that Zstat so I had to adjust the gains way down. @gckless ; helped me to tune everything also. I really don't like the performance of that sub, so I decided to go Xcons after having a pair of Icons in my old BMW. The initial plan was to go a single Xcon 15 on the 2K, but the plans grew to dual Xcons strapped on two BC2ks @ 2 ohms for 4000 watts.
http://i450.photobucket.com/albums/q...ps1992d6e9.jpg
http://i450.photobucket.com/albums/q...ps3097aaf7.jpg
http://i450.photobucket.com/albums/q...pseca28097.jpg
http://i450.photobucket.com/albums/q...psef96cd33.jpg
I had to slightly mod the battery tray for the XS Power D3400 to fit. The initial battery was small as all heck. Hence I had to use a small piece of wood to help out the bracket. A pain the rear getting these batteries here, Crutchfield hooked me up with free shipping. Shout out to XS and CF.
http://i450.photobucket.com/albums/q...ps874a2241.jpg
I just recently installed some battery terminals from Toolmakerz and it really cleans up the mess, I will have to take a new pic. It looks way better and much cleaner. I also got rid of the loom.
Since I decided to build bigger I had to order some more goodies. So I ordered a second 2K, the MB Onx4.125, two more XS Power D3400s for the rear. I wanted to go with the D3100s, but shipping weight is 3lbs over so I went with the 3400's.
http://i450.photobucket.com/albums/q...ps596844c8.jpg
the 4 channel
http://i450.photobucket.com/albums/q...ps976d8d3c.jpg
35 feet of power and ground from knukon
http://i450.photobucket.com/albums/q...psef9289b4.jpg
2 sets of toolmaker terminals that are freaking awesome. I went with the 2/4, 4/0 and the 6/0 sets.
http://i450.photobucket.com/albums/q...ps97ae1ebd.jpg
Still waiting on a second sub from SSA which should be coming in the mail in a week or so. But heres where @double 07 ; did the thing for me.
http://i450.photobucket.com/albums/q...psbb4ae7e7.jpg
Test fit of the Xcon 15, oh yeah
http://i450.photobucket.com/albums/q...psdd458749.jpg
Beasty sub
http://i450.photobucket.com/albums/q...psdfd7b82f.jpg
As for the electrical, I'm still waiting on a few things. I bought a second alternator from a parts broker out of Tokyo for around $60.00. I packed it up and it has arrived at Excessive Amperage as of last week. I reached out to DC, Ohio Gen, and a few others. Nate seemed really cool, so I'm hoping he can do something for me. I know that 70a alternator won't do the trick with something like this. I'm shooting for at least 200a-250a (if I'm lucky) so we will see. Nate came back and confirmed he could 250a output so it should help me out with power.
http://i450.photobucket.com/albums/q...ps5a7f67e0.jpg
http://i450.photobucket.com/albums/q...ps81192d31.jpg
http://i450.photobucket.com/albums/q...ps0b5e01d9.jpg
Awesome that is gonna sound incredible!
So as of last week I was able to get alot of things installed. Went dual runs of power and ground which was hell pulling through that little van. A little Armor All on the cable jacket helped to do the trick.
http://i450.photobucket.com/albums/q...psa3cc1529.jpg
Dual runs
http://i450.photobucket.com/albums/q...psd359e770.jpg
From there I had the amp rack/battery box built. One of my good friends in Japan came through on this for me and did an excellent job. @gckless ; hooked me up with a voltmeter which I installed on the amp board. It came out looking cool.
http://i450.photobucket.com/albums/q...ps83f98e0b.jpg
Battery box, batt box cover, and amp rack for the second BC2K
http://i450.photobucket.com/albums/q...ps28376b27.jpg
Everything was carpeted to match and it's install time.
Test run of the MBQ 4 chan. which sounds really good. It was vinyl wrapped under the seat.
http://i450.photobucket.com/albums/q...psdb126e82.jpg
BC2Ks going in and being strapped up. Nice lil' amps.
http://i450.photobucket.com/albums/q...ps24fe8618.jpg
Fuse blocks ran for the 2ks and 4 chan
http://i450.photobucket.com/albums/q...ps8372474d.jpg
Everything in. Still have to finish putting in the two rear batteries, but I'm traveling for work in Korea. Once I get back I will make some more progress. Also I needed a tad bit of power wire so I will finish that also.
The fuse blocks on top are for the dual runs of power wire from the front of the van.
http://i450.photobucket.com/albums/q...ps8c9c24b7.jpg
Ready to get back and put in some work.
Nice man. Good log. Ready for vids.