Going to be Deadening the whole rear half of car and doors. Also building box for SSA XCON 15" nothing really special. Will more than likely be using MurderMat MDK for trunk/rear deck and BL for the doors. Will get some before and after videos of the flex and rattle. Will post pics of the car soon.
Pics of the XCON i picked up locally for $200.
Backseat out and most of trim out, not gonna remove trunk stuff til deadener arrives.
Got wood and supplies to build box
Box Design(keeping it simple for now since this is my first box)
Fb = 32 Hz
Vb = 4 ft^3
External Height = 14 in
External Width = 33 in
External Depth = 27 in
Port Width = 5 in
Cut Sheet List:
* All Dimensions in Inches.
* Wood Thickness is 3/4 for all Parts.
External Enclosure Parts:
2 x Top & Bottom (3 parts) = 33 x 27
Left & Right Sides =
Side 1 = 25 1/2 x 11 3/4
Side 2 = 26 1/4 x 11 3/4
Front = 27 1/4 x 11 3/4
Back = 33 x 11 3/4
L Port Internal Assembly Parts:
Front to Back = 20 1/2 x 11 3/4
Extension = 3 x 11 3/4