Closed Thread
Page 1 of 2 1 2 LastLast
Results 1 to 15 of 17

Reload Thread: 01 buick lesabre- 15" fi on aq2200 build

  1. #1
    Rainelli's Avatar
    Rainelli is offline Member



    Join Date
    Mar 2012
    Location
    CView, FL
    Posts
    101
    Post Thanks / Like
    Mentioned
    0 Post(s)

    01 buick lesabre- 15" fi on aq2200 build

    I've been working on this build for about a year now but had to put it on hold for awhile. But im finally able to pick it back up.
    Here's what I have in it so far:

    15" fi bl fully loaded dual 1ohm voice coil
    4 cubic ft custom built box tuned to 33hz ( not the best but works for the time being)
    Aq2200d
    Big 3 in 1/0 awg knukonceptz cca ( my batterys under my backseat )
    for right now 4gauge kicker wire from battery to amp
    Kenwood kdc-bt652u
    Stinger rcas
    Stock alternator
    And stock front and rear stage.



    And here's what I plan on doing:

    Adding another 15" fi bl
    Getting a box designed by ryan @ ram designs and built by dylan at dl designs
    Planning on 8cu ft tuned to 33hz with a kerfed port 45 angles and rounded edged and a bedliner finish
    220a mechman alternator
    Adding a kinetik khc16v 1600w
    All 1/0 awg knukonceptz cca
    Some Aq ts6.5 components up front or maybe some mb quarts
    Knukonceptz krystal kable rcas
    karma ss 10gauge speaker wire
    And some kno knoise sound dampener all over
    Ill have some pics of my current set up posted later and ill continue to post pics and vids as I go.
    Input and advice is always appreciated







  2. #2
    Rainelli's Avatar
    Rainelli is offline Member

    Threadstarter


    Join Date
    Mar 2012
    Location
    CView, FL
    Posts
    101
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: 01 buick lesabre- 15" fi on aq2200 build

    01 buick lesabre- 15" fi on aq2200 build-3050.jpg
    Attached Thumbnails Attached Thumbnails 01 buick lesabre- 15" fi on aq2200 build-3046.jpg   01 buick lesabre- 15" fi on aq2200 build-3044.jpg   01 buick lesabre- 15" fi on aq2200 build-3057.jpg   01 buick lesabre- 15" fi on aq2200 build-3058.jpg   01 buick lesabre- 15" fi on aq2200 build-3056.jpg  

    01 buick lesabre- 15" fi on aq2200 build-3063.jpg   01 buick lesabre- 15" fi on aq2200 build-3067.jpg  




  3. #3
    Rainelli's Avatar
    Rainelli is offline Member

    Threadstarter


    Join Date
    Mar 2012
    Location
    CView, FL
    Posts
    101
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: 01 buick lesabre- 15" fi on aq2200 build

    https://www.youtube.com/watch?v=jEvV...e_gdata_player

    A quick lil video before I tuned my amp.
    Ill have a better one later




  4. #4
    cdc351jeferson's Avatar
    cdc351jeferson is offline Premium Member cdc351jeferson is a Supporting Member of the forum!



    Join Date
    Jul 2012
    Location
    austin tx
    Posts
    1,658
    Post Thanks / Like
    Mentioned
    12 Post(s)

    Re: 01 buick lesabre- 15" fi on aq2200 build

    Quote Originally Posted by Rainelli View Post
    I've been working on this build for about a year now but had to put it on hold for awhile. But im finally able to pick it back up.
    Here's what I have in it so far:

    15" fi bl fully loaded dual 1ohm voice coil
    4 cubic ft custom built box tuned to 33hz ( not the best but works for the time being)
    Aq2200d
    Big 3 in 1/0 awg knukonceptz cca ( my batterys under my backseat )
    for right now 4gauge kicker wire from battery to amp
    Kenwood kdc-bt652u
    Stinger rcas
    Stock alternator
    And stock front and rear stage.



    And here's what I plan on doing:

    Adding another 15" fi bl
    Getting a box designed by ryan @ ram designs and built by dylan at dl designs
    Planning on 8cu ft tuned to 33hz with a kerfed port 45 angles and rounded edged and a bedliner finish
    220a mechman alternator
    Adding a kinetik khc16v 1600w
    All 1/0 awg knukonceptz cca
    Some Aq ts6.5 components up front or maybe some mb quarts
    Knukonceptz krystal kable rcas
    karma ss 10gauge speaker wire
    And some kno knoise sound dampener all over
    Ill have some pics of my current set up posted later and ill continue to post pics and vids as I go.
    Input and advice is always appreciated
    nice man sounds like a good build . are you going to be getting a voltage regulator for your alt?



    headunit : Sony xab-601bt
    fronts: infinity kappa 60.9's
    box : Bill Fitzmaurice Truck tuba DD 600series 10"
    amp: Kicker zx500.1
    REFS: Bradfordp2612 , Double 07 , NASTY08IMPALA , mzlady

  5. Thanks Rainelli thanked for this post
  6. #5
    Rainelli's Avatar
    Rainelli is offline Member

    Threadstarter


    Join Date
    Mar 2012
    Location
    CView, FL
    Posts
    101
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: 01 buick lesabre- 15" fi on aq2200 build

    Thanks. Its my first "big boy" build. Im not to familiar with a voltage regulator tho. Never really looked into it




  7. #6
    cdc351jeferson's Avatar
    cdc351jeferson is offline Premium Member cdc351jeferson is a Supporting Member of the forum!



    Join Date
    Jul 2012
    Location
    austin tx
    Posts
    1,658
    Post Thanks / Like
    Mentioned
    12 Post(s)

    Re: 01 buick lesabre- 15" fi on aq2200 build

    cool man just stick with the 12v batteries then if your not getting a voltage regulator. saw you listed a kinetik 16v battery . save your money jsut get 12v



    headunit : Sony xab-601bt
    fronts: infinity kappa 60.9's
    box : Bill Fitzmaurice Truck tuba DD 600series 10"
    amp: Kicker zx500.1
    REFS: Bradfordp2612 , Double 07 , NASTY08IMPALA , mzlady

  8. #7
    05_ZX636's Avatar
    05_ZX636 is offline CarAudio.com Elite



    Join Date
    Apr 2006
    Location
    alabama
    Posts
    740
    Post Thanks / Like
    Mentioned
    19 Post(s)

    Re: 01 buick lesabre- 15" fi on aq2200 build

    if you decide to run another 2200d, I am going to list one for sell on here as soon as I can get it out of my car



    2012 rs 9.0 scion xb, 2 obsidian audio 18's, skar audio 1500.1

    refs: Sold to: MYTrunkSlamz, Buck, reflecting

  9. #8
    Rainelli's Avatar
    Rainelli is offline Member

    Threadstarter


    Join Date
    Mar 2012
    Location
    CView, FL
    Posts
    101
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: 01 buick lesabre- 15" fi on aq2200 build

    Ok what size 12v would ya recommend?




  10. #9
    martiandancer31's Avatar
    martiandancer31 is offline Front Towards Enemy



    Join Date
    Nov 2009
    Location
    Los Angeles, CA
    Posts
    1,725
    Post Thanks / Like
    Mentioned
    11 Post(s)

    Re: 01 buick lesabre- 15" fi on aq2200 build

    solid so far. Those cars are good fun.




  11. #10
    Rainelli's Avatar
    Rainelli is offline Member

    Threadstarter


    Join Date
    Mar 2012
    Location
    CView, FL
    Posts
    101
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: 01 buick lesabre- 15" fi on aq2200 build

    Ok im going to be getting the khc2400 instead.




  12. #11
    Rainelli's Avatar
    Rainelli is offline Member

    Threadstarter


    Join Date
    Mar 2012
    Location
    CView, FL
    Posts
    101
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: 01 buick lesabre- 15" fi on aq2200 build

    This is going to be my first big build and I was wanting to start getting into competing but I don't wanna get embarrassed. Is their anything I can do to improve my build or anything. Im always trying to learn as much as I possibly can about car audio




  13. #12
    ThatChevyGuy's Avatar
    ThatChevyGuy is online now i heart Jager



    Join Date
    Jul 2006
    Location
    Arkansas
    Posts
    12,201
    Post Thanks / Like
    Mentioned
    12 Post(s)

    Re: 01 buick lesabre- 15" fi on aq2200 build

    Quote Originally Posted by Rainelli View Post
    This is going to be my first big build and I was wanting to start getting into competing but I don't wanna get embarrassed. Is their anything I can do to improve my build or anything. Im always trying to learn as much as I possibly can about car audio
    i had a 99 intrigue and there was this thick black mat on the back of the rear seats, i cut that off and cut out the plastic portion of the rear arm rest so when its down there is a vent, i gained a lot...



    REFS:
    Squeak9798, Kumbos310w6, BigBangTheory, Jmanpc, MillzThaYungin, WLDock, -Leister-, ThomasG, J31Rob (and a few more I have forgotten)
    Quote Originally Posted by Spider Monkey View Post
    eat my asshole you insignificant bastard child of a retarded dingleberry cunt wrinkle fuck toy
    Quote Originally Posted by subzero View Post
    her pussy better be that nicest pussy you ever ever ever had. she better suck, swallow, jack off, eat ass and snatch, make sammiwich, do yard work and fix the vehicals while nude. Because a bitch like that is definately gonna cause alot of stress in your life, even thou she keeps your wallet and your balls drained.
    Quote Originally Posted by 05fronty View Post
    bitch you better swallow and not make a mess

  14. #13
    wickedwitt's Avatar
    wickedwitt is offline CarAudio.com Veteran



    Join Date
    May 2010
    Location
    Abilene, TX
    Posts
    2,982
    Post Thanks / Like
    Images
    5
    Mentioned
    42 Post(s)

    Re: 01 buick lesabre- 15" fi on aq2200 build

    Got a guy local w/ a Fi SP4 15" in his Lexus. Tuned to 32 and sounds beautiful. GL w/ build.



    Stupid Loud.

  15. #14
    Rainelli's Avatar
    Rainelli is offline Member

    Threadstarter


    Join Date
    Mar 2012
    Location
    CView, FL
    Posts
    101
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: 01 buick lesabre- 15" fi on aq2200 build

    I don't have a arm rest in the back and my back seat doesn't fold down I was thinking about cutting a hole in my rear deck to help vent. I also saw someone on here talking about removing the 6x9s




  16. #15
    T.I.K.'s Avatar
    T.I.K. is offline F*ck it, we'll do it live



    Join Date
    Oct 2010
    Location
    Charleston, SC
    Age
    21
    Posts
    4,151
    Post Thanks / Like
    Mentioned
    25 Post(s)

    Re: 01 buick lesabre- 15" fi on aq2200 build

    Quote Originally Posted by Rainelli View Post
    I don't have a arm rest in the back and my back seat doesn't fold down I was thinking about cutting a hole in my rear deck to help vent. I also saw someone on here talking about removing the 6x9s
    Yeah, remove your 6x9's and leave the grills. Rear fill is for homos.



    Get taken down to funky town on MobileAudioForum.com.

Closed Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Replies: 10
    Last Post: 03-02-2010, 12:06 AM
  2. Got my Fi Q 15 back, debating on box
    By Buck in forum Enclosure Design & Construction Help
    Replies: 16
    Last Post: 08-26-2009, 11:05 AM
  3. i got to 15.3 volts on my batt
    By AznRevlAzn in forum General Discussion
    Replies: 24
    Last Post: 09-28-2005, 12:03 AM
  4. 01 malibu pioneer won't turn on
    By jbl_marshall21 in forum Head Units
    Replies: 4
    Last Post: 09-17-2005, 07:39 AM

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may not post attachments
  • You may edit your posts

1e2 Forum