2005 Audi A4 install

[RuDog]

Hey everyone,

I figured I would post up my Audi build, considering a year ago i knew nothing and this forum educated the hell out of me. also, it seems like NO ONE does Audis, so i figure if there is someone like me out there, wondering how to take apart theirs, maybe this will help.

big thanks to 702cody for the DC Audio level 4 15" with XL Coils, and also to everyone who every wrote a sticky in the Help 101 section. i think i've read them all.

The Car: 2005 Audi A4, 2.0T.

I've added: Clarion VX401 HU, stinger 1850w Bat (trunk), Big 3 with KnuKonceptz 1/0 ga Kolossus Fleks, BB2400.1 mono block, DC Audio level 4 15" with XL Coils, 3.5 Cu. Ft. Box Ported to 32 Hz (thanks to the box building section for the design)

Still to come: all new interior speakers (4 6" component systems) 4 channel amp for those, sound deadening throughout.

Already broke: the sunroof shade has managed to get thrown off its track, so that will have to be fixed eventually. Trunk lid liner had to be foamed in, and the rear deck lid as well (it kept hitting the rear window, lol)

I have to get a picture of the final box installed, I've been busy since i put it in. This was my first first full build that i did 100% in my garage, so maybe its a little messy. But hey, it works.

[RuDog]

Here are the final install pictures. I had to put the mdf down behind the box to make sure it stayed in place during "spirited" driving.

[Jsantoyo89]

nice job! i miss my audi