3 Kicker L7 12's Enclosure

Quote:

---

Originally Posted by JayDubb757

Titebond II, 15 gauge brad nails to line up, countersunk #2 square coarse thread pocket screws to squeeze tight. silicone caulk on inside joints.
Pretty much overkill...all you need is glue and clamps.

---

I don't agree with you there. Box looks nice just couldn't tell what you used

You do absolutely amazing work.

Yeah, the woodworking is d@mn near flawless from the pictures. Congrats on that.

How does it sound? What tuning?

Quote:

---

Originally Posted by Kangaroux

I don't agree with you there. Box looks nice just couldn't tell what you used

---

I've been building cabinets for 10+ years, glue and clamps is all you need.
If you glue two pieces of wood together, and try to break it, it's not going to break at the joint you glued....trust me.

Quote:

---

Originally Posted by DCtC

How does it sound? What tuning?

---

Sounds pretty impressive for Keekars!!

Tuned to 34hz in a Tahoe.

very nice work sir

Quote:

---

Originally Posted by JayDubb757

I've been building cabinets for 10+ years, glue and clamps is all you need.
If you glue two pieces of wood together, and try to break it, it's not going to break at the joint you glued....trust me.

---

I know glue makes a very strong bond I just don't trust it myself lol.

How did you make the 45 cuts on the 2x2 bracing? Tablesaw?

this is a good looking box

Quote:

---

Originally Posted by JayDubb757

http://i48.tinypic.com/vzir6q.jpg

---

It's the multiple angles of the bracing that is absolutely sick!

Quote:

---

Originally Posted by kushy_dreams

How did you make the 45 cuts on the 2x2 bracing? Tablesaw?

---

table saw and miter box.

Beautiful box, very nice handskills, obviously you know this at 10 years+ wood working. I just try to get my boxes cut to specs, beauty comes in time ;)

I suppose it also helps to have the right tools, and a nice workship. Not on my sidewalk. >_>

you do great work

Great work, the definition of clean carpentry. the 45's are what struck me the most... that and the cleanliness of your work area. I am jealous! One question... did you install it as bare MDF?