8 Attachment(s)
first build 06 g6 AQ3500.1 HO alt dc 12 lvl4 xl's big 3 batts double din comp set ...
Build will consist of Sony doubledin xab-601bt got the parking brake safety disabled . 3 xs3400 batts. Big 3 . Mechman 240Amp alt. AQ3500.1 . DC 12 LVL4's with xl parts. 3cuft ported box made by brian at starmountain . Infinity kappa 6.09's will update as i complete. Missed some pics mid install just got in the zone . As of now half big3 is done xs3400 upfront . 1/0 ,remote,rcas,bassknob all run the the trunk. comp set installed and double din in place.
Attachment 26536478
deadening the doors first attempt and yes it is sloppy
Attachment 26536480
getting the 6.5 in
Attachment 26536481
finally found a good spot for the xover
Attachment 26536482
1/0 knukoncepts kollosus flex to the back
Attachment 26536483
Attachment 26536485
got the player in and dash reassembled
Re: first build 06 g6 AQ3500.1 HO alt dc 12 lvl4 xl's big 3 batts double din comp set
Nice start man! Turn that **** box around and seal off your trunk :fro:
Re: first build 06 g6 AQ3500.1 HO alt dc 12 lvl4 xl's big 3 batts double din comp set
Thanks! very possible i will do that ive got a crap ton of stinger roadkill and such i can use for that maybe? today to finish big 3 and install alt . going to the homedepot today for sub screws wood and such to mount amps and batts. just need to figure out how to anchor batts :P
3 Attachment(s)
Re: first build 06 g6 AQ3500.1 HO alt dc 12 lvl4 xl's big 3 batts double din comp set
Attachment 26536489
Old alt removed waiting for 240amp mechman and big 3
Attachment 26536490
piece of wire i hammered the split lug and got it to fold inside then melted a ton of flux into the wire and torched solder in the split and on end . you cant pull the lugs off if you wanted to :P used all set screw lugs for power and made the grounds and shown in pic .
Attachment 26536491
New alt and big 3 complete! (and i did remember to hookup factory wire at batt just took pic before hand )
Re: first build 06 g6 AQ3500.1 HO alt dc 12 lvl4 xl's big 3 batts double din comp set
Nice build.......TUNED IN!!!!!!
Re: first build 06 g6 AQ3500.1 HO alt dc 12 lvl4 xl's big 3 batts double din comp set
Thanks! Hope to be 100% by the weekend
4 Attachment(s)
Re: first build 06 g6 AQ3500.1 HO alt dc 12 lvl4 xl's big 3 batts double din comp set
Attachment 26536555Attachment 26536558Attachment 26536557Attachment 26536556
2 xs3400's AQ3500.1 Plenty of deadener for the trunk and volt meter waiting to go in :) Now to get the baby to sleep so i can get to work
1 Attachment(s)
Re: first build 06 g6 AQ3500.1 HO alt dc 12 lvl4 xl's big 3 batts double din comp set
Attachment 26536602
New ho alt showed me belt tensioner is trash will be swapping it out tonight
8 Attachment(s)
Re: first build 06 g6 AQ3500.1 HO alt dc 12 lvl4 xl's big 3 batts double din comp set
Attachment 26536643
Got volt meter in and bass knob hooked up
Attachment 26536644
getting batt mounted
Attachment 26536645
mounting amp
Attachment 26536647
amp mounted
Attachment 26536648
work in progress
Attachment 26536649
Attachment 26536650
READY FOR SUBS!!!!!!!
Re: first build 06 g6 AQ3500.1 HO alt dc 12 lvl4 xl's big 3 batts double din comp set
Quote:
Originally Posted by
04murdalanche 
Nice start man! Turn that **** box around and seal off your trunk :fro:
This.
Re: first build 06 g6 AQ3500.1 HO alt dc 12 lvl4 xl's big 3 batts double din comp set
Aren't his fuses on the wrong side, furthest away from equipment, no?
Re: first build 06 g6 AQ3500.1 HO alt dc 12 lvl4 xl's big 3 batts double din comp set
Re: first build 06 g6 AQ3500.1 HO alt dc 12 lvl4 xl's big 3 batts double din comp set
Quote:
Originally Posted by
Montana This.
also i think with port and subs loading off the trunk lid its gonna get real loud no need for a wall type with 2 12s its gonna be louder the way it is i think
Re: first build 06 g6 AQ3500.1 HO alt dc 12 lvl4 xl's big 3 batts double din comp set
Box looks pretty small... a pair of 12's in 3^ft? I hope that's net space at least.
Your fuses go within 18" AFTER the battery. Not sure if that's how you have it, but they are supposed to be after the battery, before the amp. Make sure you have one up on the front battery as well.
Also, you could MAJORLY benefit from actually sealing off those doors. Get some sheet metal and deaden it, and cover up those massive holes in the doors.
Re: first build 06 g6 AQ3500.1 HO alt dc 12 lvl4 xl's big 3 batts double din comp set
Quote:
Originally Posted by
TheUnderFighter Box looks pretty small... a pair of 12's in 3^ft? I hope that's net space at least.
Your fuses go within 18" AFTER the battery. Not sure if that's how you have it, but they are supposed to be after the battery, before the amp. Make sure you have one up on the front battery as well.
Also, you could MAJORLY benefit from actually sealing off those doors. Get some sheet metal and deaden it, and cover up those massive holes in the doors.
guess ill clear it up so no more quesitoning i have 300amp fuses in following locations between alt and batt for big 3 , 12" from battery on power run to the back. the longer cable is the power run that will be fused before lansing on back battery . the duals will come off that battery to the amp so i am properly fused . box is 3cuft net . thats what dc recommends for their 12's . yes i know i could have sealed doors better never used deadener before and kinda learned as i went my next job would be significantly better . thanks for all comments and concerns
