Skar audio VVX15 8cft box buildness

[VisceralSound]

Also, it does sound very awesome even if its cabin firing, accurate and loud.

[VisceralSound]

So I'm not 100% on the sound quality on these videos since I haven't listened to them but watching them it looks alright:
I think the box needs some further bracing or something haha.
Skar Audio VVX15 demo - YouTube
then after to do a lower song.
https://www.youtube.com/watch?v=JDd9nVcTXLY

[VisceralSound]

@SkarAudio
@MaliBOOM

[chillin]

How does your box keep growing? It started as 8 cubes, we then established back on page 3 or 4 that it was actually less with the dims you gave, then on you tube, you say it's 9.8 cubes. I don't think box size increases e-peen, but i could be wrong.

It does look to be putting out some bass though.

[VisceralSound]

How does your box keep growing? It started as 8 cubes, we then established back on page 3 or 4 that it was actually less with the dims you gave, then on you tube, you say it's 9.8 cubes. I don't think box size increases e-peen, but i could be wrong.

I thought it was 8 cft when I posted the thread then Page3-4 whatever it was said it was like 7.<__> but I think when I messaged Jason sometime ago in emails it was bigger? I'll triple check again >:|

[murph]

Wangin hard

[VisceralSound]

Wangin hard

Thank you!

[mazdakid]

Why seal the sub into the trunk with foam?

[VisceralSound]

Why seal the sub into the trunk with foam?

Since its cabin firing, its to make sure no pressure goes backwards, thus losing output.

[chillin]

Is the sub still firing into the cabin with the ports, or just the ports and the sub is completely sealed away? I can't tell from the vid.

[kushy_dreams]

So by foaming off the trunk like you did, wouldn't you be seperating the front wave from the rear wave of the cone and the port is just producing the rear wave?

wheres @audioholic or @keep_hope_alive

[VisceralSound]

Sub is up, so its in the trunk, Ports are only cabin firing.

[VisceralSound]

So by foaming off the trunk like you did, wouldn't you be seperating the front wave from the rear wave of the cone and the port is just producing the rear wave?

wheres @audioholic lol

If needed I can fix it, but sounds great right now so :shrug:

[chillin]

So by foaming off the trunk like you did, wouldn't you be seperating the front wave from the rear wave of the cone and the port is just producing the rear wave?

wheres @audioholic or @keep_hope_alive

Thats what i was thinking. I think you are supposed to foam it off from the sub back. Pretty sure the point of the port is to join front and back waves from the sub and join them.

[VisceralSound]

Thats what i was thinking. I think you are supposed to foam it off from the sub back. Pretty sure the point of the port is to join front and back waves from the sub and join them.

Once others chime in I can peal the half up and refoam