Skar audio VVX15 8cft box buildness

[VisceralSound]

I am assuming the sub is D2 correct? I would run the amp at 4 ohms if so. And just set gains accordingly. Wont push the sub too hard as long as you dont clip, and will send a much more efficient signal.

With my 2v preouts on the HU wouldn't I have less distortion risk/clipping running at 1ohm vs 4 having to turn the 4ohms up a little further than the 1? or does that fall into play.

[Bettr n' Revrse]

I see over excursion in your future lol

I see a lot of bottoming out in your future... Heck the box for my 18 is only 5.75 cu net.... If you really want that big of a box I would think about adding 2 more spiders to your woofer to keep it from leaving the gap or be really conservative on the power....

[VisceralSound]

[jaeguerra909]

Ull never kno how many dbs ill there's so many **** factors I thought I'd be doing a 150-151 when I did my.New build but.only did a 149.4

[VisceralSound]

Ull never kno how many dbs ill there's so many **** factors I thought I'd be doing a 150-151 when I did my.New build but.only did a 149.4

Here in town we have an audio shop which I guess have a termlab so once my systems done I'll ask for a price on using it if its decent I'll give it a shot but I have no clue if I should lab it on daily songs since I don't care much for straight tones?

[VisceralSound]

Got this **** in today have it somewhat installed with my Type R, once the VVX gets in I'll swap it out and mount it right but heres a picture of this beaut.

[VisceralSound]

Sub should hopefully be arriving tomorrow at some point!

[SKAR-MaliBOOM]

Tuned in

[VisceralSound]

Tuned in

Don't bother reading like pages 2-9 haha anyways thanks Ryan good to hear, I should be painting the box after this next check too and I'm working on trying to see if Toolmaker will make me a metal plate with SKAR Audio on it (like the size between the SK1500.1 and 4500.1 big enough to mount of my box and look cool.

[SKAR-MaliBOOM]

That sounds like a pretty sick idea! Tuned in for sure!

[VisceralSound]

That sounds like a pretty sick idea! Tuned in for sure!

Right on, will hopefully be able to update a picture/video of the VVX15 in its natural habitat tomorrow if not Sunday (IF UPS can friggin, deliver my sub tomorrow haha).

[SkarAudio]

So I decided to give up pretty much my trunk to power a single vvx15 off of a single SK1500.1 (I have not gotten the VVX15 nor the amp due to the woofers being out of stock until the 5th and no monies for the amp yet)
Design (c) Mobile Enclosures.

3D:

Propped up (not all of it glued in at the time, but I DO have it pretty much done in my trunk, just need to wait for the 15" to come so I can finally put the lid on:

*edit* Heres a photo of it in the car with the lid off, kind of hard to get a overhead view of it inside it and its a little bright:


I'll post some videos and more pictures of it with the lid off in the AM since its dark and raining right now.

Fantastic Job!

[VisceralSound]

Fantastic Job!

Hah thanks kevin, I got my SK1500.1 last night and I really do enjoy it, I'm sure I can expect the same from the vvx15.

[VisceralSound]

! Heck yeah, ill upload pictures when I get on my laptop but this biznatch is awesome.

[DonH]

Box is waaaay to big. Designer fucked upbthinking thats going to work out well... One its not going to load well in your trunk, two trunk hatch is gona come way to close to the ports...