I've only posted up once in Craigslist, but i noticed there's someone else who looked like they copied and pasted my add and added their number. Haha. Since my customer base is mainly in Kansas, i'm trying to get some business down here around Stillwater while i'm going to school for a little extra money.
I modeled a box in BassBox Pro that was 9 cubes with 216 sq in of port tuned to 36 hz. Peaked at 38 and had an F3 at 30.8, so should be decently musical.
This guy is coming up in a couple hours to let me hear this setup, so i'll get back on what i think it can do on the meter.
And yeah, if i need anything that a good old jig saw and router can't accomplish i'll hit you up. Last time i used a CNC was in high school, and it made making a 2 18" box with 4 6" aero ports SSOOO easy. Haha.
HDC3's model better if you have 3 or more. But with only 1 or 2 they are very peaky around the tuning frequency. The roll off with 3 or more is a lot more gradual. Lowering to tuning only decreases the peak, it doesn't really move the response much lower. I put in a 28 hz tune just for fun, and it was a very flat response, but didn't help the low end much. A smaller port would help more though, but he's mainly interested in being very loud, while being able to play most music. No Decaf unfortunately. Haha.
As for modeling them, those programs are ok for a basis of what it "may" do, but a wall is a whole new beast. lol
Hmm, just personal preferences. I still like playing in to the lower 20's.
So what is he aiming for on the TL?
Alpine - ASE (local) - Batcap - C&D Tech - CT Sounds - DC - eD - Excessive Amperage - Rainbow
Yeah. It's nice to be able to see a "general" response curve, but like you said, it's hard to judge what it will actually do.
I have a single cab truck with a 2 10's tuned to 38 hz, yet it can play all the way down to 24 (can do a 142.1 at 24hz).
Buck: His old setup was 2 Kicker L7 15's, and he says even with only about 500 watts per sub, they are already louder and sound a ton better than the Kickers (not hard to do. Haha). I think he's aiming for mid to high 40's after he gets a second 2200. I honestly don't see him having a problem doing at least a 145, but we'll see about that 149. Haha.
put body filler on the outside of the kerf to make it smooth!
$480 a year??? you're an idiot
Smoothed out with wood glue, then went over it with Fiberglass. If i get a chance and throw a little milkshake on the inside and smooth it.
He did a great job on the box. Has a pretty flat response. Can't wait to get it metered. And to start on the wall. Easily in the low to mid 40s. And it isn't very peaky at all, to anyone wondering.
Refs: Bought from: Doola36 (CA), lilbone44 (CA), TheEnforcer98 (CA), avs20 (CA), mobeious (CA), plugitin (CA), SWFL (CA), Mattd0344 (CACO), Bumpin Kota (CA), flaboy22 (FLSPL), skaraudio (CACO)
Sold to: Orcus332 (CSF), Highs On Bass (CSF), wklose99 (CA), 1ndatrunk (CACO), upzaudio (CACO), lightnin1213 (CACO), GAMEOVERCCA (CACO), xx-wade-xx (CACO)
Traded with: Kangaroux