150dB Trunk Build - 2001 Honda Civic Lx - 2 DD 9515G + 2 Sundown SAZ-3500d

Can you do threaded rod?

Quote:

---

Originally Posted by TaylorFade

If you flush mount it, that will be fine. I just don't think you should get them any closer to the roof of the trunk. Even another 3/4". You need as much clearance between the subs and the roof of the trunk as you can get so the pressure can get into the cabin. It's already lagging behind the port. No need to trap it any further.

It is sometimes beneficial to have them loading off of a wall, but I don't think that applies in this case.

---

I see what you mean. I have the rear deck off so ive got factory speaker holes to help get some of that pressure out. I think if i cut away some of the rear deck it will help as well.

http://i109.photobucket.com/albums/n...IMG_1108-1.jpg

Got about 6 inches to the top of the roof

---------- Post added at 12:02 AM ---------- Previous post was at 12:02 AM ----------

Quote:

---

Originally Posted by Bettr n' Revrse

Can you do threaded rod?

---

yeah i was thinking about doing that

I'm rootin' for you, bro.

BTW- how do you like your front stage? It's like the exact drivers I was going to go with if I did it DIY style. Pm me your impressions if you don't mind.

looking good,gives me the confidence I needed to know I can stuff a proper spec box in my 1.7EL for 2 RE SE15s :D
are you running your stock alt? hows the voltage drop with those batteries?

what is it tuned to?

how the hell did you get a 6 cube box in there the box for my 18 is about 4.3 and it barely fits and i have the same vehicle only ex

Build in the trunk.

ahh ok see i built mine out then put it in can only fit a 3" wide box between the trunk opening