Printable View
So, this is my 2001 Mazda Tribute, and the evolution of her.
It started with one head unit.
Attachment 26529118
And then a 10 W1, Amp, Box, and Wiring kit for 100 bucks from a friend.
Attachment 26529127Attachment 26529125
Then some mods to get the amp working again.
Attachment 26529128
And finally 2 6x9's were added to the cargo area.
Attachment 26529120
The 6x9's make it look tacky. Do they serve a purpose facing that direction?
Nice otherwise.
Then a new box was put together, and the JL was upgraded to a W3.
Attachment 26529134Attachment 26529130Attachment 26529131Attachment 26529133Attachment 26529132
That's where Im at now, still need to carpet, put a door over the tool box, and mount my amps.
When I would open the hatch to listen to it, too much bass and not enough mids/highs so I just added some 6x9'sQuote:
Originally Posted by sbcaprice305
Gotcha, didn't know if you tailgated alot or what.Quote:
Originally Posted by kyle3194
above the tool box area is that wasted space?
If so I would recess the amp in there so it is flush with the top.
Ya it is, so you are saying you would mount the amp up on that space? I originally wanted to put them on the back, but im definitely open to suggestions.Quote:
Originally Posted by crispin
Def recess the amp(s) in the top, it will look really good like that.Quote:
Originally Posted by kyle3194
Only problem that i have with that is where should i run the wires?Quote:
Originally Posted by crispin
cut a hole in the box on the back wall that faces the rear seat in the space above the toolbox area.
That will bring all your wires into the area that the amps will be sitting in.
It is pretty simple.
