Closed Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 15 of 39

Reload Thread: (2) SA-8s ported, work in progress 02 Toyota Tacoma Xtended Cab

  1. #1
    30Hertz's Avatar
    30Hertz is offline Member



    Join Date
    Jul 2011
    Location
    Central Cali
    Posts
    117
    Post Thanks / Like
    Mentioned
    0 Post(s)

    (2) SA-8s ported, work in progress 02 Toyota Tacoma Xtended Cab

    Alright, I know I recently put back in my 15" Brahma, but I wanted to try a dual 8 set up. Might go triple 8 but trying two for now to see how it'll sound.

    (2) SA-8s
    1.2^ft net after displacements at 25hz with 20 sq inch of port area (trying port pointing to the rear)
    Got way more power than I need for two of them off a Orion 2500d

    Onto the build thus far. Doesn't look like much yet, but we'll see...taking my time in between work.









    Just for shits N giggles I'm going to paint the interior white and putting in a plexi window to see the motors. Also have my trim panel rings cut for the top, going to put a layer of glass to flush the subs and will be finished in Vinyl.

    There's a separate internal wall that I had to put in so I could get the proper ^ft otherwise it would have been to large for only two of the 8's.

    I should be doing more soon.




    Feedback:
    http://www.splbassx.com/forums/index.php?showtopic=9609
    Also available is ebay name upon request
    Purchased from:
    919motoring




  2. #2
    BigSix's Avatar
    BigSix is offline Whippin the Bass



    Join Date
    Aug 2009
    Location
    Austin,Tx
    Posts
    2,241
    Post Thanks / Like
    Mentioned
    2 Post(s)

    Re: (2) SA-8s ported, work in progress 02 Toyota Tacoma Xtended Cab

    looking good bro



    Refs- Hrtbrk1,Kharps,BenzmanSl65amg,power-fanatic07,ryanm923,goindef154,subydude81
    cianzo,Sthib,FasFocus,Misfits
    Quote Originally Posted by misfit138 View Post
    It's a fucking shame that you got caught up trying to steal from somebody, you lowlife piece of ****. I hope you fall, asshole first, onto a 14" combat knife that's attached to a 18v Dewalt drill...
    Quote Originally Posted by retrojordans View Post
    The MTs are just like the 05' XXX

  3. #3
    Orion Man's Avatar
    Orion Man is offline Livin' Loud!



    Join Date
    Apr 2006
    Location
    Everywhere
    Posts
    836
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: (2) SA-8s ported, work in progress 02 Toyota Tacoma Xtended Cab

    Thats going to sound good but give you some good low end as well.



    2003 Nissan Maxima SE Titanium Edition
    -Alpine--Focal--Massive Audio--Stinger--Kinetik--Second Skin-

  4. #4
    Duncan Brown's Avatar
    Duncan Brown is offline Junior Member



    Join Date
    Oct 2011
    Location
    Oceanside, CA
    Posts
    3
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: (2) SA-8s ported, work in progress 02 Toyota Tacoma Xtended Cab

    Looks promising. The SA-8's are nasty "not so little" little subs




  5. #5
    30Hertz's Avatar
    30Hertz is offline Member

    Threadstarter


    Join Date
    Jul 2011
    Location
    Central Cali
    Posts
    117
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: (2) SA-8s ported, work in progress 02 Toyota Tacoma Xtended Cab

    Should get some more progess pics today, hopefully my plexi comes in so I can put the top on and start my glassing




    Feedback:
    http://www.splbassx.com/forums/index.php?showtopic=9609
    Also available is ebay name upon request
    Purchased from:
    919motoring

  6. #6
    Phoenix Risen's Avatar
    Phoenix Risen is offline OG.... Original Ginger



    Join Date
    Jun 2010
    Location
    Dayton/Springfield, Ohio
    Posts
    4,063
    Post Thanks / Like
    Mentioned
    27 Post(s)

    Re: (2) SA-8s ported, work in progress 02 Toyota Tacoma Xtended Cab

    having played around with a lot of these subs that tuning is a bit too low. i did a design for them at 28hz and couldnt get much of anything out of them past 50.

    but still in for the results.



    R.I.P. 2008 Hyundai Tiburon GS
    2005 Subaru Baja turbo, build in planing stages.

  7. #7
    30Hertz's Avatar
    30Hertz is offline Member

    Threadstarter


    Join Date
    Jul 2011
    Location
    Central Cali
    Posts
    117
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: (2) SA-8s ported, work in progress 02 Toyota Tacoma Xtended Cab

    Well if worse comes to worse, I can always shorten the port I suppose




    Feedback:
    http://www.splbassx.com/forums/index.php?showtopic=9609
    Also available is ebay name upon request
    Purchased from:
    919motoring

  8. #8
    30Hertz's Avatar
    30Hertz is offline Member

    Threadstarter


    Join Date
    Jul 2011
    Location
    Central Cali
    Posts
    117
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: (2) SA-8s ported, work in progress 02 Toyota Tacoma Xtended Cab

    My progress today thus far:

    Painted inside of the box, routed out the plexi window, created lip to inset plexi panel for mounting (not finished), drilled hole for wire...mock up

    Next up, round over the speaker flush rings, work on 1/2" MDF beauty panel for top, paint the top panel where speakers are












    back to work




    Feedback:
    http://www.splbassx.com/forums/index.php?showtopic=9609
    Also available is ebay name upon request
    Purchased from:
    919motoring

  9. #9
    supermaxx123's Avatar
    supermaxx123 is offline CarAudio.com Elite



    Join Date
    Aug 2009
    Location
    I.E.
    Posts
    1,830
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: (2) SA-8s ported, work in progress 02 Toyota Tacoma Xtended Cab

    nice work, let me know how they do with low tuning. I've got mine tuned to 37hz and it plays down to 30hz strongly.



    Bought from: tc3k101, vitveet, chico305, pieper88, Toxic Tuan, rusty_armadillo, tristanmay
    Traded with: modskwod, jmkanek
    Sold to: smd4life, AQHDC3, fastfocus00

  10. #10
    30Hertz's Avatar
    30Hertz is offline Member

    Threadstarter


    Join Date
    Jul 2011
    Location
    Central Cali
    Posts
    117
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: (2) SA-8s ported, work in progress 02 Toyota Tacoma Xtended Cab

    And I'm done for today









    Feedback:
    http://www.splbassx.com/forums/index.php?showtopic=9609
    Also available is ebay name upon request
    Purchased from:
    919motoring

  11. #11
    Germ305's Avatar
    Germ305 is offline Bannęd



    Join Date
    May 2010
    Location
    Right behind you.
    Posts
    1,642
    Post Thanks / Like
    Mentioned
    19 Post(s)

    Re: (2) SA-8s ported, work in progress 02 Toyota Tacoma Xtended Cab

    I wish i could build a box like this




    "You told me God was the answer
    When I ask him for sh*t, I get no answer, so God is the cancer"

  12. #12
    Join Date
    May 2009
    Location
    Arlington, Tn
    Posts
    1,341
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: (2) SA-8s ported, work in progress 02 Toyota Tacoma Xtended Cab

    GREAT work. I would like to do something like this with plexiglass for my trunk install, but my subs and port will be firing back. It would be pretty much pointless unless I were to fire my sub into the rear deck where my factory 10 was. 2 questions. Which router bit did you use on the top baffle? It's a 45 something I know, but forgot the name of it. Also, Those rings you made, is it 3/4" MDF stacked on top of 1/2"?



    All girls are whores, just ask your mom how you got here.

    Feedback Thread
    http://www.caraudio.com/forums/buyer-seller-feedback/407829-blackfx4intn-feedback-thread.html

  13. #13
    30Hertz's Avatar
    30Hertz is offline Member

    Threadstarter


    Join Date
    Jul 2011
    Location
    Central Cali
    Posts
    117
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: (2) SA-8s ported, work in progress 02 Toyota Tacoma Xtended Cab

    Quote Originally Posted by Nut Hair Trick View Post
    2 questions. Which router bit did you use on the top baffle? It's a 45 something I know, but forgot the name of it. Also, Those rings you made, is it 3/4" MDF stacked on top of 1/2"?
    1) I just used a 45 degree 1/4" shank bit, cheap *** one from Orchard does the trick
    2) The flush rings are 3/4" MDF, they are just added on top of the original 3/4" baffle, the beauty panel is 1/2" MDF.

    I'll fiberglass the inner portion of the top panel where the flush rings are when I get the plexi window in, its en-route so we'll see. I've got some Di-Noc white carbon fiber to go on the top glassed portion, the rest will be grey vinyl to match my interior.

    Thanks for the comments, been taking my time on this one. Hopefully it'll sound good...who knows tho since they're recommended to be tuned to 30hz lol.

    I might either 45 or round over the outside of the rings...ive got some MDF left over if anyone needs some rings cut




    Feedback:
    http://www.splbassx.com/forums/index.php?showtopic=9609
    Also available is ebay name upon request
    Purchased from:
    919motoring

  14. #14
    30Hertz's Avatar
    30Hertz is offline Member

    Threadstarter


    Join Date
    Jul 2011
    Location
    Central Cali
    Posts
    117
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: (2) SA-8s ported, work in progress 02 Toyota Tacoma Xtended Cab

    Re-tuned the port to to 30 Hertz. Decided I had it to low.



    Waiting for my pexi to get here so I can get this **** thing finished..my Di-Noc is here along with my vinyl.




    Feedback:
    http://www.splbassx.com/forums/index.php?showtopic=9609
    Also available is ebay name upon request
    Purchased from:
    919motoring

  15. #15
    Silver-N-Black's Avatar
    Silver-N-Black is offline CarAudio.com Elite



    Join Date
    Aug 2007
    Location
    SoCal
    Posts
    1,288
    Post Thanks / Like
    Mentioned
    25 Post(s)

    Re: (2) SA-8s ported, work in progress 02 Toyota Tacoma Xtended Cab

    Looking good can wait to see how if looks when finish.



    Coming soon!!!!!!!!!!!!!!!!!!!

    Bought From : CrazedCat, motley, the727kid, JJones, TheLow, adas, Goindeaf, Reflecting,93dakota

Closed Thread
Page 1 of 3 1 2 3 LastLast

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may not post attachments
  • You may edit your posts

1e2 Forum