Buck's Exploder build log

[Buck]

I tell you what, Air forces by Jeezy is loud. Very loud. So is Chop Chop by The YoungBloodz. So is everything. I have a panel rattle badly though. Not sure what it is. I thought it way my subs bottoming out, but it's not. Some wood slapping on wood. Need to go to work in about a hour and a half, fml. Didn't sleep. The bass is worth it!

[Buck]

Ok guys box information.

14.6 cubes @ 27-28 hz, 174.25 in^2 of port, 12.45 in^2 per cube.

[sacsking916]

Not too shabby Senor. Now where's the vids?

[Cruzer]

me and bumpin and buck need to meet up one day. bumpin so secret with his setup, ill just have to hear it in person! lol

buck i gotta admit, im not gonna sit in there and listen, ill stand outside. maybe u can turn them down or off and i can hear the rainbows, how u like them, or can u even hear them? haha

im busy this weekend with an alabama get together, where ill get my setup tuned, so if/when we meet afterwards, mine should sound pretty good(wont be loud though like yours)

[Bumpin' Goalie]

me and bumpin and buck need to meet up one day. bumpin so secret with his setup, ill just have to hear it in person! lol

buck i gotta admit, im not gonna sit in there and listen, ill stand outside. maybe u can turn them down or off and i can hear the rainbows, how u like them, or can u even hear them? haha

im busy this weekend with an alabama get together, where ill get my setup tuned, so if/when we meet afterwards, mine should sound pretty good(wont be loud though like yours)

Secrets compensate for indecision.

And, yes, Buck's is too loud for me lol. My ears still feel it! Something to be proud of, I guess.

The Rainbows, in my opinion, sound quite nice.

Here's a secret revealed: A Skar VVX showed up at my door today. Figured I'd try out/review one of the faster selling products on the forum. Let the testing begin.

[Cruzer]

i rather hear ur old dcons over a skar

but u said u tuning ur setup, which means u have a nice front stage! so i wanna hear

[Bumpin' Goalie]

i rather hear ur old dcons over a skar

but u said u tuning ur setup, which means u have a nice front stage! so i wanna hear

Front stage is undergoing very minor imaging changes, EQ'ing, and tweaking. It's about...halfway to its potential I'd say.

The Dcons will be here until the buyer (friend of mine) is ready. So you may still be able to have a listen.

The Skar is more promising than many people give it credit, I think. On that note, I'll be able to confirm or deny that statement shortly!

I like using budget equipment to prove the 'install>gear' point, so I am aiming to do just that.

[Buck]

Thread jackers! Bumpin' I prolly need your help again, imagine that. I'm so tired though. We gotta tune some **** and get this working right. Something is off about it but I can't quite put my finger on it.

[Cruzer]

where are u guys meeting at? 12 gauge?

there are couple guys on DIYMA also in nashville that want to have a nashville meet, granted they probably arent bass heads like you buck haha

but we need a good place to meet

[Cruzer]

where are u guys meeting at? 12 gauge?

there are couple guys on DIYMA also in nashville that want to have a nashville meet, granted they probably arent bass heads like you buck haha

but we need a good place to meet

[RAM_Designs]

I bet the lows are sick.

[RAM_Designs]

145-150. Just a ground pounder. I need to scoot it closer to the hatch. Should pic up lows better and be able to tell whether or not my low tuning worked.

Yeah, load it closer to the hatch and you'll get crazy lows...just have to find the sweet spot.

[Kangaroux]

[Bumpin' Goalie]

Sometimes at 12 gauge, other times at homes.

Buck, I'll try to help next chance I get.

Cruzer, which DIYMA guys? I wouldn't mind a meet if I could find time.

And...back to the topic.

[Cruzer]

just a few they are local. they arent overly active, and im sure there might be a couple more, just ran across this seeing they are in nashville. i could make a thread and see if we get any bites

Was going to go with ID stuff...now...? - DIYMA.com