I **** at painting. and too inpaitient to let my buddy do it for me.Quote:
Originally Posted by infamous_e46
Printable View
I **** at painting. and too inpaitient to let my buddy do it for me.Quote:
Originally Posted by infamous_e46
Question for you sir, I have a '99 Malibu and my seats 60/40 both fold etc etc chevy cars..
I'm port firing into the cabin as well but port up, are you sealing the trunk off or have you yet? if so what have or are you going to do to seal it off?
you need to make sure your have air transfer if you want to use the trunk like a loading chamber. Sub back port side or port back is the way to go in these cars. but if you want to fire forward, you need to fire port and sub forward and seal off the trunk so the pressure can stay in the cabin.Quote:
Originally Posted by vISUALHype
Well I'm kinda stuck with sub up port front (cabin) since thats what works with my 9.8cft box :V
http://i169.photobucket.com/albums/u...x/IMAG0108.jpg
In that case you need to make sure you have air flow into cabin tru rear deck. might have to take rear deck speakers out. air flow is very inportant.
shoulda done sub up port rearQuote:
Originally Posted by vISUALHype
Wouldn't have been much room for that haha its litterally to the back of the trunk, I'm still building it but I'm pretty positive it'll get low.Quote:
Originally Posted by CAT MAN
---------- Post added at 02:34 AM ---------- Previous post was at 02:33 AM ----------
Yep already done.Quote:
Originally Posted by subzero
Big burtha goin back in the cavi Friday...Quote:
Originally Posted by subzero
@The_Grimy_OneQuote:
Originally Posted by subzero