any place around here locally that sells it? I'm going to stay away from the aerosol version, I've had that screw up stuff before, I mean getting it on things that you didn't want stripped.
Printable View
any place around here locally that sells it? I'm going to stay away from the aerosol version, I've had that screw up stuff before, I mean getting it on things that you didn't want stripped.
Pretty sure Ive seen it at Lowes, If not, Painters Supply most definitely sells it in LP
Man,could almost do the v8 swap while you got it apart!
Are you going to rebuild the motor at all?I'd throw a small cam or something...
You can do a shitton to these 4.3's to scavenge power out of them. They are just a 350 with 2 pistons removed from them. A little head work goes a long way
no room for v8 swap when im adding 2 more alts.
I was thinking of camming it but I hate the sound they make (like its going to choke out in idle)
its getting new headers, sparkplug wires, spark plugs, gaskets and a few other things.
this is soooo puss, you have no money. ;)
thats perty man nice work so far! love the 15k's some serious powa there!
looks very promising. how long you estimating till shes done?
tons of work great job
Well it should be back in driving mode by mid march, this painting is seriously taking 100000 times longer than I thought.. I'll probably have the full system running for sure by slamology - that's when I'm making the debut. It was supposed to be SBN, but there's just no time and I refuse to cut corners with the underbody for just 1 show.
well finally started painting, hopefully I can get these done overnight. I hate dry times... I'm literally watching paint dry :(
In all there's going to be 4 coats of paint,
2 coats of POR-15 silver, and 2 coats of POR-15 engine enamel (aluminum)
Por-15 is supposed to go on very thin, so if it looks like I missed a couple spots, its because they'll be covered better with the next coat.
http://i571.photobucket.com/albums/s...a/IMG_1279.jpg
Not making deadlines??
Seems so familiar.....
Kinda fell asleep while waiting for the paint to dry, but the heads are now ready for enamel, and I also put a coat on my front springs.
http://i571.photobucket.com/albums/s...a/IMG_1282.jpg
http://i571.photobucket.com/albums/s...a/IMG_1281.jpg
The springs will be top coated with Flex Cote red :)
http://i571.photobucket.com/albums/s...a/IMG_1283.jpg