DD9512g - Ford Taurus 99 - ED nINE.1 - eDead

[DonH]

14.5 Tall
30 Width
20 Depth
Ugh just built this box too :P Black carpet, red port

so little! how cute lol..... dont think this folded horn would fit lol

[mlstrass]

why you tuning a DD to 32Hz???

[mazdakid]

why you tuning a DD to 32Hz???

he doesnt know any better. a veteran forum member designed it for him.

[raz0rxx]

he doesnt know any better. a veteran forum member designed it for him.

After a slight box modification due to the sub being fairly wide to mount, its now tuned to 36. I could probably fit a bigger box but this taurus oval back windshield is a pain in the ***.....

[mlstrass]

2.5^3 is plenty of volume, especially if you eventually plan to throw some real power at it.

36Hz will be much better, still a little bottom heavy, but will be good for rap.

[mlstrass]

he doesnt know any better. a veteran forum member designed it for him.

veteran with no DD experience

[raz0rxx]

2.5^3 is plenty of volume, especially if you eventually plan to throw some real power at it.

36Hz will be much better, still a little bottom heavy, but will be good for rap.

That was the design intent , when it comes to box designs and relating the Ts parameters to box tuning I am a total newb. If anyone has somewhere I can read up on an information about this please post a link! Loving the feedback though, keep it coming. Work is boring!

[boomzabit]

That box is ******. I wonder how that compares to my setup ?

[mlstrass]

That was the design intent , when it comes to box designs and relating the Ts parameters to box tuning I am a total newb. If anyone has somewhere I can read up on an information about this please post a link! Loving the feedback though, keep it coming. Work is boring!

Never read up on them, but have built around 30+ enclosures for DD/AQ subs in the last 2 years, so I've learned some things along the way...

[raz0rxx]

2.5^3 is plenty of volume, especially if you eventually plan to throw some real power at it.

Actually I still have ANOTHER ed nine.1 on pre-production at the ED website. Should be what....2 months before they **** out?

[raz0rxx]

Never read up on them, but have built around 30+ enclosures for DD/AQ subs in the last 2 years, so I've learned some things along the way...

Enlighten me! Please

[fatboyracing]

That was the design intent , when it comes to box designs and relating the Ts parameters to box tuning I am a total newb. If anyone has somewhere I can read up on an information about this please post a link! Loving the feedback though, keep it coming. Work is boring!

hey I had it tuned to 38 hz and it loved it

[raz0rxx]

Port was supposed to be 3.5 wide by 11.5 tall. Due to the mounting diameter of the 9512 we had to up the height by half an inch, so it turned out to be 3" by 12". Anyone know how much of a difference that would make?

[mlstrass]

how much power will you have with 2 amps as I know nuttin about eduh stuff?

[Supergumby5000]

2.5^3 is plenty of volume, especially if you eventually plan to throw some real power at it.

36Hz will be much better, still a little bottom heavy, but will be good for rap.

36 models up much more peaky than 32hz does. 36 will be quite loud around 35-42hz, but has a horrible rolloff for the low lows and lacks output from 50-80hz as well. 32hz would make it a much better daily box in terms of playing the full range of 80hz and down. 36 would definitely increase the output at mid to upper 30's and low 40's, but the rolloffs ****