12" RE SE into a Crystler 300

[Deadbeat]

Sub ****. . .





PS - Excuse the messy garage. . my shed burned down a couple of weeks ago so everything is piled in my garage

[Deadbeat]

Test fitting. . .

[gearhound17]

looks good. Gonna have to try the kerfed corner for myself soon.

[Lizardkinged]

Could someone take the time to explain this port style to me. I'm interested.

I've made a pretty successful box for 2 pioneer SVC 10's. built a sloted vent onto the back and tuned it to 36 htz. Sounds pretty nice.
Want to go to a single 10, Probably going to get an L5... Or something similar.
Something that would be perfect for 450 RMS @ 2 ohms underrated. anything D4 that would be perfect for 450@ 2 ohms.

any suggestions?

[mmouse57]

the port style is for making less air turbulence

nice start m8

[nick06tC]

Im interested in learning more about the curved design as well.

[DB-Audio]

looks good so far

[3kgtAudio]

curved just gives you a smoother port transition, less port noise.

If you cut slots in mdf about 3/4" apart and then moisten the other side a bit you can bend it like that.

or you can also buy type of wood called bend-a-board thats specifially made to do that with.

[JBLCAMRY]

curved just gives you a smoother port transition, less port noise.

If you cut slots in mdf about 3/4" apart and then moisten the other side a bit you can bend it like that.

or you can also buy type of wood called bend-a-board thats specifially made to do that with.

[Deadbeat]

curved just gives you a smoother port transition, less port noise.

If you cut slots in mdf about 3/4" apart and then moisten the other side a bit you can bend it like that.

or you can also buy type of wood called bend-a-board thats specifially made to do that with.

moisture and MDF dont play well with each other. . .

rather, just kerf it then bend the wood, it will go without trying to pull out other tricks as long as your cuts are good.

[Hoppinlowrider]

nice box for far. ima have to make a similar one for my Fi Q. How many and how far apart do the cuts have to be? and how much length do I need to add to my port?