finally have started to build box for my 2 aarghs, about 4cuft at 35hz with about 72 sq inches of port.
this is my first ever box build let alone first ever woodwork project that wasn't from school so not gonna be real clean. gonna be powered by 1500rms, so hopefully will sound good in the end.
it will be braced with 45s in each corner, will have lengths of pine to brace top to bottom and front to back and will be double baffled. The subs will be firing up and the port will be firing back because the car is a wagon.
For the double baffle, is it better to have the driver screwed into the first board of the baffle and then the next board of the baffle around the sub so that it is flush, or just cut the holes for the sub the same size on both boards of the baffle and screw in so that it is not flush. Is one way stronger than the other? (probably a stupid question right?)
heres the pics so far
cutting it up