Have a nice day!
"Off the sidelines and back in the game"
Nice equipment you got there. That Zapco is real ****. I have an AG750 and it is clean and loud. Pair it up with some CDT comps and you will be very happy ;-)
I would think an INCH if F/G on the bottom would be more than enough, and it's a great use of the limited space you have. A hybrid box like you are making seems the most logical choice. Great work!!
Bought items from forum members: Gentaljax, Slammed, Channaman, OrangeCounty1, Sir Smoke A Lot, Teamsouthern Bass, Zxcvtypo, dave_damage, RetroAudioinc
Had to let out a long whistle when I saw the zapco nice amp
<First and only dual-alternator 'real' Saturn (pre 2002) on the planet>
Team Concepts, Team Shok Industries Team XS Power
Soon: Mystery subs + AQ20k
12.75 cubes net ~25Hz tuning 200 sq inches of port (lowz?)
AC position- 250 amp alt
Stock alt position- 225 amp alt
(2) XS Power D3100's
4 power+ 4 ground runs of 1/0-gauge to rear
152.1 @ 40Hz legal, certified...just getting started.
Any suggestions for a good set of comps, my budget is probably around $500 either new or used.
Like I said, if anyone has a pair they're willing to get rid of PM me.
Your lil' four cylinder is going to have a bunch of fun carting all that shtuff around.........
F23A1 is a decently stout motor. Find another 4 cyl engine (non-turbo, non diesel) that makes as much torque as it does horsepower. I've got the boring as 4 speed automatic. But in the 5 speed form, it's actually a fun combo. Should have no problems with that stuff. My concern would be suspension. I've got wheels on my accord and when I get fat-asses in my car, my rear tires brush the inner fender well when I really cram em in there over bumps'n'such.
Here are some picture of some work I had done today, a bit of wiring, box building, parts install, and custom fabrication.
Here is a picture of the box so far and stuff.
Got the battery and alternator in, did the big 3. Had to fabricate a new battery mount for the PC-1500 since it didn't want to fit into the stock battery slot. Still not finished, I was in a hurry. Made it out of fiberglass obviously.
Here's the port, what it looks like etc etc. 18" X 17" X 4" and continues 18" X 16" X 4".
A shot of the Zapco, a bit too big for the box, didn't plan that out too well. I'm going to make a mount and place it on a 45 angle and put the SS-6500 behind it out of sight.
Got the second battery in, hooked it up to the isolator.
I'm still looking for a set of nice comps, someone PM me if you have em and want them gone.
Jesus, that amp has so much unnecessary metal.
Nice amp, just...****...
Edit: Everythings looking good haha, nice choice of equipment.
DOWN LOW CAR AUDIO
Source- JVC KD-S100 <3
Speakers- Infinity reference 6.5's(front) and 6x9's (rear) 2 Onkyo tweeters, in each A pillar
Subs- (4) Hifonics hfi12's
Box- 12cu.ft 4th order Bandpass. ported with 6 4" aeros@46 hz (firing into the cab )
Amps- PowerBass asa-1500.1(subs) and Vr3 400.4(speakers)
Batt/wiring- Stinger spv44(trunk) with Knu 4g, and Monster 8g wiring.
looks good so far
2001 Honda Civic EX
power acoustik 8" over sized touch screen
1- Atmos Audio 18
1- Audiopipe 1000d mini @2 ohms
Electrical stock for now
http://www.youtube.com/watch?v=Cl_ardHXEkg"]My old System
http://www.myspace.com/sykodjthereal"]If you Need Beats click this
So I picked up some Zapco ref series comps from a buddy of mine he had laying around, $200 for a full set and two spare mids.
Now I need a equilizer so I can run them active.
Last edited by Mythos; 07-13-2009 at 07:58 PM.
Been a while since my last update, system is currently assembled and functional. Don't have all the pics up yet but here is some progress from a few weeks ago.
I had to make sure everything was stiff and nothing would fall apart during testing, so I did several layers of glass all over the inside of the box.
Had to buy some new speaker wires so I went 2 runs of 4 gauge split to 4 runs of 8 gauge audison.
So it's been a while and the system is obviously done. I went to a car show a week ago and competed for the first time ever. Got a score of 143.8 in stock 3 class. First run hit 140.8 and second run I hit 143.8. Looks like a few things need changing, port for one, going to have the port face the inside of the cab and hopefully soundproof the car in a bit. I'm also thinking of tuning the port to 50hz cause one of the other guys who was there (sponsored) suggested i try it out. As apposed to 38 which is what it's tuned to now. Broke my leg this weekend so we'll see when I get around to getting on this project.
Here is a picture for your viewing pleasure.
EDIT: Got first place in stock 3.
Last edited by Mythos; 09-22-2009 at 08:31 PM.