Closed Thread
Results 1 to 11 of 11

Reload Thread: Box build for Local dude, 2 10's ported 30 hz

  1. #1
    Fiercetimbo17's Avatar
    Fiercetimbo17 is offline CarAudio.com Veteran



    Join Date
    Jan 2007
    Location
    dallas
    Posts
    2,345
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Box build for Local dude, 2 10's ported 30 hz

    Ok so while i was working on the dash bezel inbetween sanding and what not i built this.
    Wood cut edges rabbeted and rounded ports for you rounded port fanboys

    Almost all together, 2 ports 1.5" wide on each side with subs on the middle


    And the final finished pics are not working either, ill figure it out and update.



    Pioneer Avic-z3
    4-way Active
    CDT ES-01
    CDT ES-04
    Dls IR8
    Zapco dc650.6
    12" idmax IB
    zapco dc 1100.1
    tsunami wiring
    200 sq ft edead/damp
    4 gallons spectrum/sludge 160 ft overkill
    132.6 db at 22 hz...





  2. #2
    Pioneer~Saturn's Avatar
    Pioneer~Saturn is offline Dr. Enclosure



    Join Date
    Jul 2006
    Location
    Dayton, OH
    Age
    26
    Posts
    5,318
    Post Thanks / Like
    Images
    7
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    2 Post(s)

    Re: Box build for Local dude, 2 10's ported 30 hz

    Lookin good...more picz



    <First and only dual-alternator 'real' Saturn (pre 2002) on the planet>
    Team Concepts, Team Shok Industries Team XS Power
    Soon: Mystery subs + AQ20k
    12.75 cubes net ~25Hz tuning 200 sq inches of port (lowz?)
    AC position- 250 amp alt
    Stock alt position- 225 amp alt
    (2) XS Power D3100's
    4 power+ 4 ground runs of 1/0-gauge to rear
    152.1 @ 40Hz legal, certified...just getting started.

  3. #3
    Fiercetimbo17's Avatar
    Fiercetimbo17 is offline CarAudio.com Veteran

    Threadstarter


    Join Date
    Jan 2007
    Location
    dallas
    Posts
    2,345
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: Box build for Local dude, 2 10's ported 30 hz

    pics are still not working...so i snapped these before i dropped it off




    Pioneer Avic-z3
    4-way Active
    CDT ES-01
    CDT ES-04
    Dls IR8
    Zapco dc650.6
    12" idmax IB
    zapco dc 1100.1
    tsunami wiring
    200 sq ft edead/damp
    4 gallons spectrum/sludge 160 ft overkill
    132.6 db at 22 hz...


  4. #4
    wasted ink's Avatar
    wasted ink is offline wasted incorporated



    Join Date
    Aug 2008
    Location
    Southern NH
    Posts
    995
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: Box build for Local dude, 2 10's ported 30 hz

    nice job.. clean carpet work




  5. #5
    MisterE's Avatar
    MisterE is offline pimp your own **** ride.



    Join Date
    Aug 2004
    Location
    filthy nasty dirty south
    Posts
    208
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: Box build for Local dude, 2 10's ported 30 hz

    did you rabbet the sides so you can tuck the carpet in there? so theres a seam on the bottom lets say, and then just a sheet of carpet for each side with it tucked all around? what size/kind of rabbet bit do you use?? clean




  6. #6
    Fiercetimbo17's Avatar
    Fiercetimbo17 is offline CarAudio.com Veteran

    Threadstarter


    Join Date
    Jan 2007
    Location
    dallas
    Posts
    2,345
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: Box build for Local dude, 2 10's ported 30 hz

    Quote Originally Posted by MisterE View Post
    did you rabbet the sides so you can tuck the carpet in there? so theres a seam on the bottom lets say, and then just a sheet of carpet for each side with it tucked all around? what size/kind of rabbet bit do you use?? clean
    Yep, makes carpeting tons easier, and i do a 1/8 by 1/8 rabbet



    Pioneer Avic-z3
    4-way Active
    CDT ES-01
    CDT ES-04
    Dls IR8
    Zapco dc650.6
    12" idmax IB
    zapco dc 1100.1
    tsunami wiring
    200 sq ft edead/damp
    4 gallons spectrum/sludge 160 ft overkill
    132.6 db at 22 hz...


  7. #7
    BushJ311's Avatar
    BushJ311 is offline CarAudio.com Veteran



    Join Date
    Feb 2008
    Location
    Pittsburgh, PA
    Age
    23
    Posts
    7,440
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    14 Post(s)

    Re: Box build for Local dude, 2 10's ported 30 hz

    Nice build.



    Dodge Magnum - (2) NS 10s - 3kwp
    85 Iroc Camaro - 425 hp sbc

  8. #8
    ItalynStylion's Avatar
    ItalynStylion is offline Audiophile



    Join Date
    May 2006
    Location
    Fort Worth, Tx.
    Posts
    1,275
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: Box build for Local dude, 2 10's ported 30 hz

    Quote Originally Posted by Fiercetimbo17 View Post
    Yep, makes carpeting tons easier, and i do a 1/8 by 1/8 rabbet
    Can you expand on this rabbeting technique? I've never heard of it before and I'm interested in learning. I don't think I've ever done it like that.



    Quote Originally Posted by qtipextra View Post
    is 2 12's overkill for HT?
    Quote Originally Posted by JimJ View Post
    It's a start.

  9. #9
    Fiercetimbo17's Avatar
    Fiercetimbo17 is offline CarAudio.com Veteran

    Threadstarter


    Join Date
    Jan 2007
    Location
    dallas
    Posts
    2,345
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: Box build for Local dude, 2 10's ported 30 hz

    Quote Originally Posted by ItalynStylion View Post
    Can you expand on this rabbeting technique? I've never heard of it before and I'm interested in learning. I don't think I've ever done it like that.
    Yea, its really simply actually. I have an adustable rabbet bit This one

    I dont use a router table I just use my fixed base.
    Get the berring for 1/8" and set depth to 1/8", rabbet all four edges. This leaves you with a 1/8" by 1/8" inset on the end caps for you to tuck carpet.
    If i need to go more in detail let me know.



    Pioneer Avic-z3
    4-way Active
    CDT ES-01
    CDT ES-04
    Dls IR8
    Zapco dc650.6
    12" idmax IB
    zapco dc 1100.1
    tsunami wiring
    200 sq ft edead/damp
    4 gallons spectrum/sludge 160 ft overkill
    132.6 db at 22 hz...


  10. #10
    ItalynStylion's Avatar
    ItalynStylion is offline Audiophile



    Join Date
    May 2006
    Location
    Fort Worth, Tx.
    Posts
    1,275
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: Box build for Local dude, 2 10's ported 30 hz

    ^Do you have any detailed pictures? I think I'm still not grasping the concept of what a rabbet bit does. Are you going to the DFW meet? Maybe you can show me there.



    Quote Originally Posted by qtipextra View Post
    is 2 12's overkill for HT?
    Quote Originally Posted by JimJ View Post
    It's a start.

  11. #11
    Fiercetimbo17's Avatar
    Fiercetimbo17 is offline CarAudio.com Veteran

    Threadstarter


    Join Date
    Jan 2007
    Location
    dallas
    Posts
    2,345
    Post Thanks / Like
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Re: Box build for Local dude, 2 10's ported 30 hz

    Quote Originally Posted by ItalynStylion View Post
    ^Do you have any detailed pictures? I think I'm still not grasping the concept of what a rabbet bit does. Are you going to the DFW meet? Maybe you can show me there.
    Yes i am, ill rabbet a piece of wood and bring the bit and everything to explain more



    Pioneer Avic-z3
    4-way Active
    CDT ES-01
    CDT ES-04
    Dls IR8
    Zapco dc650.6
    12" idmax IB
    zapco dc 1100.1
    tsunami wiring
    200 sq ft edead/damp
    4 gallons spectrum/sludge 160 ft overkill
    132.6 db at 22 hz...


Closed Thread

User Tag List

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may not post attachments
  • You may edit your posts
1e2 Forum