Avic-Z2 as the source (with z3 harddrive upgrade)
Amps are on their way you will see when they arrive
CDT Es-643 running active with the midbass in the door, mid range and tweeter in the kicks
12" IDmax IB
Positive and negative 1/0 runs from front to back
Lots of deadener already plus more as you will see
All wires techflexed
On to the pics
The baffle is done just needs to be finished but i have not decided.
finished, has 9 layers of 1.5oz mat plus the fleece.
I have pictures of th kickpanels somewhere ill see if i can find them
As for what i did today got my more sludge and sealed up the front doors.
Each door has a layer of edead layer of damplifier and some random raammat. Then covered by sludge and then covered in overkill close cell foam
Passenger door sludged
Inner doorskin with 2 layers of mat, sludge and
door sealed and sludged up, did not get to foam the outside yet because the sludge is not dry
Driverside sealed up and dry half with overkill
Tomorrow just gotta screw in the baffles mount the midbass and clay them in.
Then i can get working on the false floor