Heres a T line for Megalomaniac
Wood cut first side on
port in
port done with baffle in and 45s in the corners
top on and its done
Double flush baffle for the ed-700
Hooked it up in his car, was quite impressive for a little 6 1/2"
CarAudio.com Veteran
Heres a T line for Megalomaniac
Wood cut first side on
port in
port done with baffle in and 45s in the corners
top on and its done
Double flush baffle for the ed-700
Hooked it up in his car, was quite impressive for a little 6 1/2"
Pioneer Avic-z3
4-way Active
CDT ES-01
CDT ES-04
Dls IR8
Zapco dc650.6
12" idmax IB
zapco dc 1100.1
tsunami wiring
200 sq ft edead/damp
4 gallons spectrum/sludge 160 ft overkill
132.6 db at 22 hz...
Sick My Duck
Nice work! Got to love birch
Team High Desert Mobile Electronics ABQ, NM
Can haz?
looks d*mn good. did you round over the corners in the main chamber?
CarAudio.com Veteran
No the main chamber he lined with acoustic foam.
Birch is nice and lightweight but i hate working with it.
Pioneer Avic-z3
4-way Active
CDT ES-01
CDT ES-04
Dls IR8
Zapco dc650.6
12" idmax IB
zapco dc 1100.1
tsunami wiring
200 sq ft edead/damp
4 gallons spectrum/sludge 160 ft overkill
132.6 db at 22 hz...
CarAudio.com Veteran
Nice work man ygpm
Feedback: http://www.caraudio.com/forums/buyer-seller-feedback/318808-audiofreaks-feedback-thread.html
Dr. Enclosure
Very nice, enclosure builds ftmfw!
<First and only dual-alternator 'real' Saturn (pre 2002) on the planet>
Team Concepts, Team Shok Industries Team XS Power
Soon: Mystery subs + AQ20k
12.75 cubes net ~25Hz tuning 200 sq inches of port (lowz?)
AC position- 250 amp alt
Stock alt position- 225 amp alt
(2) XS Power D3100's
4 power+ 4 ground runs of 1/0-gauge to rear
152.1 @ 40Hz legal, certified...just getting started.
.........................
nice i need to learn how to design these...
I build Enclosures PM me
Refs:
Spy(Bought from),Goodie(traded With),Benner410 (enclosure),Timbo12(enclosure),TheMan007(Enclosure ),Upzaw2000(x3)(bought from),Bobby32(Enclosure),Tacovic(Enclosure),KoolWh ipMan(Traded With),lilmaniac2 (bought from),MarkyMark(Enclosure), HypnoticCure(Traded with),AngryOscar(Enclosure), MisterGrubbs(Traded With),LoggedOut(Enclosure x4/Traded With), Andrios(enclosure), bigbangtheory(Enclosure),Retoaudioinc(traded with), blaze383(sold to), Snow90(Enclosure), Serpent710(traded with), MysticStyl3z(sold to),cwill5(Bought from), Kingkongjr(Enclosure/Traded with), BrandonB (traded With), Moo_Awn(Bought From), Slam330(enclosure),18inchjeepin(sold to)
Resonating Reticular
Originally Posted by Fiercetimbo17
Why?
P.S. Nice T-line. Been trying to figure out how to design 'em for a week or so. Care to help a NNga out?
Now designing / building boxes.
(Only building sealed and aero port boxes.)
PM me.
Feedback Thread
Refs: MSW Danny, atsaubrey (great seller), ampjunkielikeme, wgsj_fortvalley, tEh koRnDog, bad @SS chevy, Nismos14 (who is the man.)
Dr. Enclosure
Because mdf cuts like butter and also much easier to route...just easier in general
I wouldnt call that a t-line really, meh...but I guess it is
Last edited by Pioneer~Saturn; 11-14-2008 at 11:35 PM.
<First and only dual-alternator 'real' Saturn (pre 2002) on the planet>
Team Concepts, Team Shok Industries Team XS Power
Soon: Mystery subs + AQ20k
12.75 cubes net ~25Hz tuning 200 sq inches of port (lowz?)
AC position- 250 amp alt
Stock alt position- 225 amp alt
(2) XS Power D3100's
4 power+ 4 ground runs of 1/0-gauge to rear
152.1 @ 40Hz legal, certified...just getting started.
I'm Higher Than You
nice skills.
refs:blkmrideon22s,skrilla22,eatank,ampjunkielikem e,werd,snoopysnooper,team3d, 350zspl, finkster
Feedback Thread:
http://www.caraudio.com/forum/showthread.php?t=383386
'05 Reg. Cab 1500
H.U.- pioneer deh-6800mp
Sub Amp- saz-1500d
Sub- tc3k 12" Quad 1.4ohm
Front Stage- pioneer garbage
Front Amp-
Wires- Knu Flex 1/0
Rca's- Knu Krystal
Fuse holder- kicker
Senior VIP Member
Nice build man. Very Nice. So how did she sound? How big was the box since it was only for a 6 1/2?
Anthony H.
LILA&MMOTORS, LLC.
Pioneer Head Unit AVH-P6400CD
2 12's Rock Ford's
600 watt Mobile Authority
:::Hobbies / Business:::
::Personal Sites::
Http://www.ahillaudio.com
http://local.yahoo.com/info-34131560...diocom-orlando
WebDesign, Car Audio, Rc's
Vacuum Forming
Http://www.tk560.com
(Great tips on molding and vacuum forming)
Resonating Reticular
Well, the only part that would make it not classify as a T-line would be the part directly behind the driver... but then again, that port doesn't look big enough to = cone area. =\Because mdf cuts like butter and also much easier to route...just easier in general
I wouldnt call that a t-line really, meh...but I guess it is
I could be wrong.
Now designing / building boxes.
(Only building sealed and aero port boxes.)
PM me.
Feedback Thread
Refs: MSW Danny, atsaubrey (great seller), ampjunkielikeme, wgsj_fortvalley, tEh koRnDog, bad @SS chevy, Nismos14 (who is the man.
CarAudio.com Veteran
1/4 wave is what u need to learn IDSkoT
TEAM SOUTHERN BASS
CA Feedback Thread:http://www.caraudio.com/forum/showthread.php?t=305802
Power Seller Ebay Feedback: http://feedback.ebay.com/ws/eBayISAP...me=STRK:ME:UFS
CarAudio.com Veteran
It is a t line, the chamber is because of the driver, blame EDI wouldnt call that a t-line really, meh...but I guess it is
Pioneer Avic-z3
4-way Active
CDT ES-01
CDT ES-04
Dls IR8
Zapco dc650.6
12" idmax IB
zapco dc 1100.1
tsunami wiring
200 sq ft edead/damp
4 gallons spectrum/sludge 160 ft overkill
132.6 db at 22 hz...
Mr.SQ
the line area is too small for the mounting of the driver, a compression chamber was needed.
box was designed by Immacomputer last year! Just now go around to making it.
Posting Permissions
 |
Bookmarks