Closed Thread
Results 1 to 3 of 3

Reload Thread: mcsoul's 1.4@33hz 2 10" build

  1. #1
    mcsoul's Avatar
    mcsoul is offline such is life



    Join Date
    Mar 2008
    Location
    dfw
    Posts
    4,427
    Post Thanks / Like
    Mentioned
    0 Post(s)

    mcsoul's 1.4@33hz 2 10" build

    Fiercetimbo17's super nice saw.



    My first box, all cut thanks to JD

    1.4 cubes at 33 Hz



    I did most of the cuts on the second one with djman37's help

    4 cubes at 30hz



    Tim and I putting my 1st box together until the wee hours of the night





    9.25" cutouts, Tim's Bosch router.



    A thing of beauty.




    I'll be buying the corner and wood clamps to put the 4 cubes at 30hz together
    myself at home. Thanks for the lessons guys. These are built with 7 ply 3/4" Birch
    from Lowes, I cannot recommend it, try to find 11 ply or 13 ply baltic.

    Box specs on the one we built:

    33hz 1.4 cubes

    Port 2.5 x 11.5 44.75" deep

    Port area 27.5 sq"

    box gross 27 x 13 x 16.5 = 2.546
    port wood .75 x 11.5 x (11.75 + 20.5 + 5.25= 37.5) = 323.4375 = .1872
    port volume = .7445
    speaker displacements .11 + .11 = .22

    Displacements 1.1517

    net 1.3943

    Top 27" x 16.5"
    Bottom 27" x 16.5"
    side 16.5 x 11.5
    side 16.5 x 11.5
    front 23 x 11.5

    p1 11.75"
    p2 20.5"
    p3 5.25

    Thanks again, and anyone who wants to build this box, feel free, that's
    why I posted the specs. Should work for fi q ssd bl, ayton HO and AQ sdc2.5
    (unknown cutout requirement for aq); and probably many others I'm leaving out.



    ________________________
    Car: 2004 Nissan Altima 3.5 manual
    Head unit: Alpine CDA-9815 (running active)
    Midbass: Morel HU-621 Hybrid Uniflow 8 ohms
    Mid Amp: Audison lrx 4.300 bridged 2x140w @ 8 ohms
    Doors: 24ft Damplifier Pro, Second Skin D-flex pads, eggcrate foam, sealed up.
    Tweeter: SEAS 27TFFNC
    High Amp: Audison Lrx-2.150
    Subs: Two RE SE 12 d4's
    Box: 4 cubes net at 30hz
    Sub Amp: Sound Stream Van Gough 1600.2
    Electrical: Knu Flex 1/0, Batcap 2000 in back
    Rear Deck: No 6x9's just holes and grills




  2. #2
    Snow90's Avatar
    Snow90 is offline CarAudio.com Elite



    Join Date
    Jan 2008
    Location
    West Allis
    Posts
    1,288
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: mcsoul's 1.4@33hz 2 10" build

    is that plywood?




  3. #3
    Join Date
    Jul 2007
    Location
    monroeton, pa
    Posts
    3,343
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Re: mcsoul's 1.4@33hz 2 10" build

    I'll be buying the corner and wood clamps to put the 4 cubes at 30hz together
    myself at home. Thanks for the lessons guys. These are built with 7 ply 3/4" Birch
    from Lowes, I cannot recommend it, try to find 11 ply or 13 ply baltic.




Closed Thread

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may not post attachments
  • You may edit your posts

1e2 Forum