Re: 2 15" RE SE, 2Cuft^3 per chamber, Orion 1200D.
Pretty cold out today, So i didnt get anything done except for removing the box from my trunk, where i left it lastnight, And test fit the subs.
No Speaker wire so i havent even really thought of how im gonna do terminal's.
If i were to go the bolt route, What type of bolts would i need to use? Id use ring terminals on the bolts, Bolt heads on inside, Silicone, Tighten nut on outside, Then another ring terminal from wires from amp, onto bolt, Then a second nut on the outside of the box, Just incase i had to pull the box, I wouldnt need to pull the subs. But what material bolt would give the best connection for this application?
Last edited by z0n3d0u7; 11-14-2008 at 07:41 PM.
84 Chevy Fullsize Single cab: optima red top, 1/0 threwout, Panasonic HU, ID CTX65CS tweets / X-overs, ID OEM 6.5's,(2) Oldschool Orion XTR3 PRO 8's, Orion 1200D and 4002 soon to go in.
Bought from: duece212 , basebalz13 , UNDERGROUND_BUM , Traksta15