project daily bang.. 2 10" dd 3510 off 2 saz-1500

[snoopysnooper]

but from the - on the battery to the fram i used 8 ga i had laying around =[

fail..

im going to use all 1/0 ga when i oreder 100 feet this spring..

[SeanDub]

well as of now, my 1 3510 should be here any sexond..
i have both sundowns.. i built an amp rack, and for now untill i can afford my 2nd 3510 im puttin this on in a 2.0 cubic foot t-line box tuned to 32 hz at 1 ohm off 1 saz-1500..

once i can afford my 2nd woofer, thye are going into a 4.3 (after diplacemnt) box tuned to 35-40 hz..

im gonna strap the 1500's on em..

they are going into my dodge neon..
this is what i have in my neon right now..
its 1 10" tc oem off my 1500 at 2 ohms..

heres the vid:
http://www.youtube.com/watch?v=8QWrit0PNU4

the flex is alost better in person..
im going to put the dd in basicly the same box only a little bigger..

im ordering my 2nd one in may..

here is my parts list of what i have done to my neon already:
120 sq feet of edead (2 layers)
iraggi 200 amp alt.
kinetik hc1800 in coustom welded battery tray
2 runs of memphis 4 ga into 1 run of 1/0 ga
morel midbass
crappy alpine deck i got for free
RE 6X9's
hertz tweeters in coustom pods..

what i will be doing in the next month:
2 dd 3510g's (one comming today)
2 sundown saz1500's strapped (have both alreadt)
coutom amp rack..
2 runs of kun 1/0 ga
knu rca's (i have weak directed rca's right now, lol)
new midbass (maybe dd, not sure)
and in liike june or july ill be getting a new duck, maybe pioneer, and doing fiberglass door panels..

ill have lots of pics up later today =]

what do yall think of my system now
and what do yall think about my plans??

any advice?

Do you just mean ported? I've never seen a 2 cube t-line. Those boxes are massive.

[MikeyB]

Yes definately do the big 3 in 1/0

[snoopysnooper]

okay, i got a box design made by ryan m.. looks great..
im ognna build it some time this week:



gonna be nice.. 1.8 cubes tuned to 35 hz.. double baffle..

heres a vid of me breaking in the 3510 off 400 rms on my sundown (wired at 4 omhs)
bass on 5.. vol starts at 10 but i turn it up to 17.. gains 1/2 up..

its in a box that i built for my tc oem'
1.25 cubes at 28 hz ftl =[

well, still hits great.. cant wait to break it in and put it in a decent box =]

video-age:

http://youtube.com/watch?v=e29PNlpi5fM

[dbhittin]

looks good man.. let me know how those 187s do though.. i wish i could of tried them out

[snoopysnooper]

yeah, im building a box for those too this week.. lol..
im putting them in my moms volvo, lol..

im gonna put it on my other sundown untill i get my other dd, then when i get my other dd, im gonna put the IA's on a hifonics bxi..

i assume the 12's will be louder, the subs will have a lilttle bit more power on the dd, and ALOT more cone area.. lol..

both should be good though =]

[icpurplepplalot]

you know you should just break-in your sub the regular way you are going to listen to it, instead of underpowering it right?

I mean it doesn't really matter, but there is reall no sense to break it in with less power.

[Joseph M]

Nice build! cant wait to see the 2nd DD and the other 1500d. i gota say those DD are BEEFFFY.. dont mind if i ask how much ?

[yama168]

nice build you got here.....


Aloha