+ Reply to Thread
Results 1 to 3 of 3

Reload Thread: Looking to get a custom box built in phoenix.

  1. #1
    BluJay's Avatar
    BluJay is offline Junior Member



    Join Date
    Feb 2011
    Location
    Phoenix, AZ
    Posts
    4
    Post Thanks / Like
    Mentioned
    0 Post(s)

    Looking to get a custom box built in phoenix.

    Looking for someone to build this box to spec for me. I'm willing to drive around the phoenix/mesa/scottsdale etc metro area to pick it up...

    Minum 3/4" MDF or HDF made for 2 12's PORTED

    Volume- 1.5Cu.FT EXACTLY per chamber

    port D/L - 3" x 7" x2 bottom right/Left of each corner

    *External Dimensions
    W-380MM [14-15/16in]
    H-360MM [19-7/8in]
    D-340mm [13-3/8in]*

    Mounting hole - 277mm [10-7/8in]

    Displacement - 0.144 cu.ft

    Thanks



    ~{BluJay}~




  2. #2
    520reaudiosx15s's Avatar
    520reaudiosx15s is offline Senior VIP Member



    Join Date
    Mar 2009
    Location
    BLARE IZONA
    Posts
    419
    Post Thanks / Like
    Images
    31
    Mentioned
    17 Post(s)

    Re: Looking to get a custom box built in phoenix.

    CUSTOM_SUBWOOFER_ENCLOSURES__LOUD!!

    CUSTOM_SUBWOOFER_ENCLOSURES__LOUD!! (Glendale)




    Quote Originally Posted by BluJay View Post
    Looking for someone to build this box to spec for me. I'm willing to drive around the phoenix/mesa/scottsdale etc metro area to pick it up...

    Minum 3/4" MDF or HDF made for 2 12's PORTED

    Volume- 1.5Cu.FT EXACTLY per chamber



    port D/L - 3" x 7" x2 bottom right/Left of each corner

    *External Dimensions
    W-380MM [14-15/16in]
    H-360MM [19-7/8in]
    D-340mm [13-3/8in]*

    Mounting hole - 277mm [10-7/8in]

    Displacement - 0.144 cu.ft

    Thanks



    dD9518s(SC) Lanzar(Opti7k) Kinetik Excessive Amperage Xstatic Pioneer Kicker(Hyperflex) Dynamat Stinger

    Scott Owens 180 db run at Edge Audio In Phoenix,Az http://vids.myspace.com/index.cfm?fu...eoid=103176001

  3. #3
    r1banshee's Avatar
    r1banshee is offline Senior VIP Member



    Join Date
    Nov 2009
    Location
    phx
    Posts
    155
    Post Thanks / Like
    Mentioned
    1 Post(s)

    Re: Looking to get a custom box built in phoenix.

    Quote Originally Posted by BluJay View Post
    Looking for someone to build this box to spec for me. I'm willing to drive around the phoenix/mesa/scottsdale etc metro area to pick it up...

    Minum 3/4" MDF or HDF made for 2 12's PORTED

    Volume- 1.5Cu.FT EXACTLY per chamber

    port D/L - 3" x 7" x2 bottom right/Left of each corner

    *External Dimensions
    W-380MM [14-15/16in]
    H-360MM [19-7/8in]
    D-340mm [13-3/8in]*

    Mounting hole - 277mm [10-7/8in]

    Displacement - 0.144 cu.ft

    Thanks


    that will only give you 1.73^3 before any displacements 1.58^3 with woofer, this would give you .08 for your port




+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

1e2 Forum