PDA

View Full Version : component amp question



ramsizzle
05-09-2005, 01:52 AM
waht channel amp would u recomend i use for the JL AUDIO XR653-CS 3 way component set?

LightningStryk7
05-09-2005, 02:16 AM
well if u got 2 of em a 2 channel amp. Maybe a 4 channel amp if there 4ohm comps then u could bridge 2 of the channels to become a 2 channel amp there as well.

ramsizzle
05-09-2005, 02:23 AM
so if i get 2 sets i can get a 2 channel amp ?

audiolife
05-09-2005, 09:17 AM
a 2 by 70 is all thats needed the front side of my van gogh 320.4 beats them pretty good.

ramsizzle
05-11-2005, 12:04 AM
waite totally confused lol .... i want only one set where im going to take that set and but the 4 inch speaker in the back and the 6.5 and the tweet in front .... im going to have some 6 x 9's running off the h/u in the back so do u think that i should keep that 4" in the front ?

audiolife
05-11-2005, 12:46 AM
? yes i see lol you are wanting to put the 4" in back and 6x9? lol thats gonna sound loud but sound like poo0op

squeak9798
05-11-2005, 12:57 AM
so do u think that i should keep that 4" in the front ?

YES

ramsizzle
05-12-2005, 01:01 AM
so ill run the 4's and 6.5's at the bottom wit the tweet in the stock area.... plus the 6x9's in the back for the rear fill.... but waite lol wait channel amp could i run to get the full rms outta these?

squeak9798
05-12-2005, 01:04 AM
Run the comp set in front off of a 2-channel amp, run the rear fill off of your HU's internal amplifier.

ramsizzle
05-12-2005, 11:42 AM
thanks alot that was what i was looking for the whole time lol... would a 100 watts be too much for the comp set?

req
05-12-2005, 12:15 PM
no. 100 would be awesome.

a 100x2@4ohm amp will do perfect.

99StangGt
05-12-2005, 12:18 PM
100w is not to much. I was running my IDs with 230w per side. If your looking for a amp i would look into a jl 300/2. that would be 150w per side and would work great

99StangGt
05-12-2005, 12:20 PM
Or a jl 450/4 that would run 150 for the fronts and 75 for the rears

ramsizzle
05-15-2005, 07:02 AM
is there an amp that can do what the jl does but for a cheaper price?

squeak9798
05-15-2005, 12:08 PM
Just run the rears off the HU, and find one of the millions of 150 x 2 amps.

ramsizzle
05-15-2005, 05:25 PM
but i kind of wanted to run them at about 70 to 80 watts because the 6x9's i want are 75 watts rms and i dont wanna underpower them that bad

audiolife
05-15-2005, 06:05 PM
in about every case from what you are calling underpowered all your speakers will be at normal volumes. power is nice wont argue that but rear speakers will totally mess up a front stage unless its processed. car audio is ran in one of 2 fashions noadays stereo and surround. there is no more "quad"in car audio that died in the early 80's. stereo is purely left and right so rear fill will mess it up with too much power. the suround sound places the power and processes it for you....to me in a car suround sound sounds like pure *** unless done right (very very few get it to that point) and i would still take a propper stereo over a propper surround sound for music until the dvd format for music becomes the norm.

squeak9798
05-16-2005, 09:47 AM
:word: