treble setting at -6 with my alpine hu and kappas?

[mithong]

i have infinity kappa 60.5cs components and an amp pushing 100x2 to them... i have an alpine head unit and while i love the tweeters, it seems like they are REALLY bright... when im playing at loud volumes, i have to have the bass setting at 0 and treble setting at -6 out of -7... while this sounds best to me, it just seems kinda weird that i have to set it this low?


also i have my crossover set to "flat" instead of contour.. should i be changing this?

[Beat_Dominator]

You can try playing with the crossovers. Does the passive x-over for thoes components have a jumper in them or any othe methods of adjustment? Sometimes that's a good way to go.

[mithong]

You can try playing with the crossovers. Does the passive x-over for thoes components have a jumper in them or any othe methods of adjustment? Sometimes that's a good way to go.

no the x-overs dont have any settings except the flat and contour setting

[Beat_Dominator]

The flat/contour is on teh deck or the passive x-overs?

If it's in the passives, you might give it a try.

[mithong]

The flat/contour is on teh deck or the passive x-overs?

If it's in the passives, you might give it a try.

the x-overs... thsi is what the contour option does "reduce midrange output resulting in louder percieved high frequency and bass"
so obviously this would just make the tweeters MORE bright right.

[Beat_Dominator]

Bummer.

[mithong]

The reason is because Alpine has a useless Treble center frequency ...


meaning? in laman's terms

[mithong]

It doesn't do much to reduce the frequencies which cause the harshness ...


well theres 4 freq options in the treble setting... 10k 12.5 15.k and 16.5 k


which one should i have it on to have the most effect on the harshness

[mithong]

10 kHz, but it still won't do a whole lot ... :p:

The center frequencies are far too high ...

do you have any idea if the flat or contour setting is better?

[mithong]

You could try it ...

they seem to sound the same =/