PDA

View Full Version : Hey Jmac..



marleyskater420
04-26-2005, 04:58 AM
Can you explain the 5250rpm principle? Where hp is something/5250=tq or something like that?

marleyskater420
04-26-2005, 05:33 AM
33000/(2*Pi) = 5252.113122 (most round off to 5252)

It can also be written as Horsepower = Torque*RPM/5252, although it's not completely accurate ... but close enough ...
so is tq=hp*rpm/5250?

marleyskater420
04-26-2005, 05:45 AM
so if we know how to find tq. we can find the hp from it..and all the other crap along w/ it too....i am so reading this tommorow in class..


thanks man

ighettoboyi
04-26-2005, 01:56 PM
don't forget engine speed stoner

marleyskater420
04-26-2005, 05:24 PM
don't forget engine speed stoner

how about you **** my *** fukbag.

Maybe if you were here around longer than you've been, you wouldn't open your ignorant mouth like you do.

Crashking
05-01-2005, 03:03 PM
Can you explain the 5250rpm principle? Where hp is something/5250=tq or something like that?

it scares me that you ask that question after i see what car you have and what you have done to it

i fear for the cars well being

****in nice set-up though :)

marleyskater420
05-01-2005, 07:09 PM
it scares me that you ask that question after i see what car you have and what you have done to it

i fear for the cars well being

****in nice set-up though :)

You'd be surprised at the random **** I don't know.

As for my cars well being, the ECM just blew, but that isn't related to anything I've done.

Maybe you shouldnt open your mouth until you know why people asked a question :crap: :uhoh:

Until you can educate me on resonant tuning of an intake manifold, and passive supercharging...I wouldnt be talking about how my car needs to be feared for. :emb:

This will be a general, if you know what you are talking about question:

Do 4 cylinders fire 2 cylinders at the same time?

http://static.howstuffworks.com/gif/engine-inline-4.gif[/QUOTE]

Crashking
05-02-2005, 12:49 AM
You'd be surprised at the random **** I don't know.

As for my cars well being, the ECM just blew, but that isn't related to anything I've done.

Maybe you shouldnt open your mouth until you know why people asked a question :crap: :uhoh:

Until you can educate me on resonant tuning of an intake manifold, and passive supercharging...I wouldnt be talking about how my car needs to be feared for. :emb:

This will be a general, if you know what you are talking about question:

Do 4 cylinders fire 2 cylinders at the same time?

http://static.howstuffworks.com/gif/engine-inline-4.gif[/QUOTE]

well that's a good thing that the ecm problem isn't related to anything you done... one less thing to give you a headache.... don't have to try and see what went wrong to cause that to happen

:crying: dude.... don't get all pissed off... didn't mean to hurt your feelings...i'm sorry i'm not as smart as you, o great one of all knowledge except for this one question that you so graciously placed upon us(i don't have it memorized off the top of my head either) it's just scary that someone that is around cars all the time would atleast know about that priciple.... or would just do a quick search on the net for it....

i might be able to educate you on that stuff sometime "soon"... well in about a year or so once i graduate UTI

as for the 4 cylinders... no i believe it is 1 at a time and not 2.... i'm not positive... didn't really go over that much in auto mechanics :)

i do know that viper v10's fire 2 cylinders at the same time from each bank... that's why some people hate em and some people love em... for the sound that they make :)

marleyskater420
05-02-2005, 02:19 AM
sometime "soon"... well in about a year or so once i graduate UTI

as for the 4 cylinders... no i believe it is 1 at a time and not 2.... i'm not positive... didn't really go over that much in auto mechanics :)

i do know that viper v10's fire 2 cylinders at the same time from each bank... that's why some people hate em and some people love em... for the sound that they make :)[/QUOTE]

At least I know you know something about engine firing.

Its one at a time. Think of this-theres 4 parts to a cycle,and 4 cylinders, each cylinder is in one part of the cycle at any given point in time.

I didnt know the viper fired twice at once...why the hell would they do that...

Wouldnt they just fire one cylinder every 72 degrees?

Are you 100% positive they two at once? I don't see how the electronics on that would work..

For your info, I have known about this equation, just simply never looked into it. Never really concerned me, seeing as I know where my tq comes in, and my hp comes in, so I dont really need an equation ;) In all honesty, I could have just called my GN buddy who has forgotten more than I will ever know, but it was too late at night.

I mean **** man, you expect me to make sure you know how to calculate bore from the piston diameter? You should be able to, but just because you dont remember the equation, doesnt mean you still dont know the principle.

I dont think I know everything,in fact I know very little, but assuming that I dont know about cars...well you dont know me :)

Beat_Dominator
05-02-2005, 02:23 AM
Yes it's 2 at a time. Almost all Inline engines are like that. Inline 5's got 3-2-3-2 though.

This keeps them running nice and smooth. An inline engine is smoother and has more torque than a v-design of the same number of cylinders.

Crashking
05-02-2005, 12:04 PM
sometime "soon"... well in about a year or so once i graduate UTI

as for the 4 cylinders... no i believe it is 1 at a time and not 2.... i'm not positive... didn't really go over that much in auto mechanics :)

i do know that viper v10's fire 2 cylinders at the same time from each bank... that's why some people hate em and some people love em... for the sound that they make :)

At least I know you know something about engine firing.

Its one at a time. Think of this-theres 4 parts to a cycle,and 4 cylinders, each cylinder is in one part of the cycle at any given point in time.

I didnt know the viper fired twice at once...why the hell would they do that...

Wouldnt they just fire one cylinder every 72 degrees?

Are you 100% positive they two at once? I don't see how the electronics on that would work..

For your info, I have known about this equation, just simply never looked into it. Never really concerned me, seeing as I know where my tq comes in, and my hp comes in, so I dont really need an equation ;) In all honesty, I could have just called my GN buddy who has forgotten more than I will ever know, but it was too late at night.

I mean **** man, you expect me to make sure you know how to calculate bore from the piston diameter? You should be able to, but just because you dont remember the equation, doesnt mean you still dont know the principle.

I dont think I know everything,in fact I know very little, but assuming that I dont know about cars...well you dont know me :)

yeah i thought of the 4 cylinder / 4 cycle... be nice to have a 2 cycle though :)... but i think i'd rather have a boosted v6(*cough* gn, syclone, typhoon *cough*) v8, or v10(viper!)

i do believe that it is 2 at once.... that's what i have read and heard everywhere... next time i'm at the viper shop that's around here i'll make sure to ask :)

yeah you should remember how to do everything :) atleast that's what everyone else thinks when they need help from someone else :) lol

marleyskater420
05-02-2005, 07:52 PM
yeah i thought of the 4 cylinder / 4 cycle... be nice to have a 2 cycle though :)... but i think i'd rather have a boosted v6(*cough* gn, syclone, typhoon *cough*) v8, or v10(viper!)

i do believe that it is 2 at once.... that's what i have read and heard everywhere... next time i'm at the viper shop that's around here i'll make sure to ask :)

yeah you should remember how to do everything :) atleast that's what everyone else thinks when they need help from someone else :) lol

Thats ridiculous they fire twice at once... I've just never heard of that. AWESOME!!

boosted GN w/ good heads=pwnage.

Personally, I'd take a SBC, bore it out, and TT the *****. Light engine, big power, sick car..hehe

I remember how to do most stuff :) Most things I need to know how to do, I can do...

Now engine building..I've yet to do that.