PDA

View Full Version : Got preliminary testing done...



btnhfan
04-21-2005, 05:02 PM
With the new crossfires.

We measured each to put out 3254w at 1 ohm at 11v!!!! WOW

With only 1 kinetik I dropped from 12.9v to 11.4

147.4 legal, 149.2 in the kick, all on the termlab

We didnt mess with anything, just threw the subs and amps in, and burped it a couple times.

The toughest person I am going up against this sunday hit a 148 in the kick, with 2 zapco 9.0s and 2 12" MTs in a 4runner, which is a much better spl car then a civic coupe. Install is everything.

These amps are awesome. I wish I could get the 4000ds.

bigbassman
04-21-2005, 05:11 PM
hehe... you say that.... but I'd take a trunk car over a 4 runner any day of the week...

with a 4 runner, you're stuck playing 41-48 hz..... well... if you're playing 50-60, you're in trouble.. cause there's a nasty vehicle induced dip there...

good luck with testing..

Loyd L.

ngsm13
04-21-2005, 05:13 PM
hehe... you say that.... but I'd take a trunk car over a 4 runner any day of the week...

with a 4 runner, you're stuck playing 41-48 hz..... well... if you're playing 50-60, you're in trouble.. cause there's a nasty vehicle induced dip there...

good luck with testing..

Loyd L.

Loyd L.

I agree with:
Loyd L.

Loyd L.

;)


NG

btnhfan
04-21-2005, 05:29 PM
Really?
I thought he would have the advantage because he had more space for power and batteries and box space for MTs.

Thats funny you say 48, because thats what hes burping it at :)

bigbassman
04-21-2005, 05:39 PM
Really?
I thought he would have the advantage because he had more space for power and batteries and box space for MTs.



he's got plenty of space but.... he's also got a thin shelled vehicle, that moves in ways it shouldn't, and funky acoustics a deaf person would laugh at... :D

go look at the results of the Great 8 challenge..... we used a 4 runner for output testing.. that screams volumes about how nasty it is...


Thats funny you say 48, because thats what hes burping it at :)

I = know nothing.. I swear....

Loyd L.

bigbassman
04-21-2005, 05:40 PM
I agree with:
Loyd L.

Loyd L.

;)


NG


you = teh lose


Loyd L.

ngsm13
04-21-2005, 05:44 PM
you = teh lose


Loyd L.

It happens... ;)

My "lose"-ness exceeds loyd's "knowing nothing"-ness...

NG

btnhfan
04-21-2005, 05:55 PM
Loyd you are a god amoung men:bowdown:

Are you going to SVR?
Maybe you can sign my chest.:cool:

idbl_fanatic
04-21-2005, 06:38 PM
Hint, have you tried in different locations as for outlaw?? you may be able to break that 150 mark ;)

btnhfan
04-21-2005, 06:45 PM
Nope. Just threw it in the kick and burped.

skeptikal
04-21-2005, 06:51 PM
nice score with no testing.... hmmm can't wait to see what my 12 SX will do in a comp box.

bigbassman
04-21-2005, 07:05 PM
Loyd you are a god amoung men:bowdown:

Are you going to SVR?
Maybe you can sign my chest.:cool:

I'm a nobody... don't forget that...


I was going to SVR, but my promotion killed that idea... I'll be working that weekend..

and yeah, mic placement is important, as stated up there by Mr fanatic :)

I can affect my score by .5 db by a movement of 8 inches of the mic..

Loyd L.

btnhfan
04-22-2005, 01:35 PM
Has anyone competed with a trunk car or does currently?
I could use some tips because I want to break the 150 mark for this sunday.

Ill post up pics of what everything looks like tonite in the car.

btnhfan
04-22-2005, 03:00 PM
Need some help now. The guy with the zapcos is at 147.1

btnhfan
04-22-2005, 06:57 PM
Heres some pics of everything

These are soon to be in the car, 1s going in tomorrow for testing

http://img.photobucket.com/albums/v11/2glocks11523/P1010182.jpg


SXs
http://img.photobucket.com/albums/v11/2glocks11523/P1010198.jpg

The amps and batt
http://img.photobucket.com/albums/v11/2glocks11523/P1010199.jpg
http://img.photobucket.com/albums/v11/2glocks11523/P1010201.jpg

Nikuk
04-22-2005, 09:23 PM
Good job & good luck.

-Nick

Randy Savage
04-22-2005, 09:36 PM
****...3500 out of the X-fires...that's nuts..

What was your impedance during testing?

Hope to see you soon down here!!

bigbassman
04-22-2005, 09:36 PM
you're at a 149.2, and you wan't 150? cake..

sand the exterior mouth, and end of the port with like 40 grit sandpaper

sand all 4 sides of the front, to bend inward into the port...and ductape over it..

sand the back end of the port parabolic, and don't ductape it..

ductape around the woofers too.... its best to take the rubber gaskets off, but its up to you..

if you're really froggy, throw about 2 quarts of resin inside the box, spread out...

there's a solid db...

Loyd L.

btnhfan
04-22-2005, 09:40 PM
Loyd you are a god.

I want a 150 legal though, not outlaw. So Ill do all that and work on box placement.


I have no idea on the box imp rise, but each sub was wired to 1 amp at 1 ohm

Randy Savage
04-22-2005, 11:21 PM
So I'm guessing that you did power calcs at 1 ohm?

btnhfan
04-23-2005, 08:10 AM
Yea

Nikuk
04-23-2005, 10:48 AM
So I'm guessing that you did power calcs at 1 ohm?

hee hee.

btnhfan
04-24-2005, 09:47 PM
Good first show. Ended up gettin 3rd, but should have been second because there was a problem with the mic for some peoples first runs that was putting up crazy numbers.

I got 149.8
Thanks Loyd, my first run was a 149.3

Second was 149.9!!!
1 tenth

First was 157.6
Thats complete bs reading with mic problems.
Had 1 15" in prefab q logic box with only 400w going to it.

Ill have some pics up soon.

SPL140.2
04-24-2005, 10:31 PM
Good first show. Ended up gettin 3rd, but should have been second because there was a problem with the mic for some peoples first runs that was putting up crazy numbers.

I got 149.8
Thanks Loyd, my first run was a 149.3

Second was 149.9!!!
1 tenth

First was 157.6
Thats complete bs reading with mic problems.
Had 1 15" in prefab q logic box with only 400w going to it.

Ill have some pics up soon.
Yeah thats skeptical a 157.6 in a prefab with 400 watts, should of protested that one!!

btnhfan
04-24-2005, 10:46 PM
Eh I still got points

Last year at finals the guy in S2 only got 155
And that was highest of year.