PDA

View Full Version : problem with crossover



PV Audio
04-09-2005, 04:42 PM
since i'm learning how to build crossovers, i decided to use up some bulk ones that i had bought from parts express. they're 2ways but i have no idea as to how to wire them to the speakers.

http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=260-175

thats the one

http://www.partsexpress.com/pe/pshowdetl.cfm?&DID=7&Partnumber=290-309

i'm using 2 of those

http://www.partsexpress.com/pe/pshowdetl.cfm?&DID=7&Partnumber=275-030

and one of these.

the crossover though is the problem. the metal bars are as follows:

the one all the way on the right says +W (woofer) and +MR (midrange, u either use a woofer or a midrange) but there is only a + in front and only one hook. the one to the left says +T (tweeter) again, no - sign and only 1 hook. now, here it gets even more confusing. the two to the left of the tweeter hook says COMMON over them, but nothing else. and finally, the last hook says +IN (for the input to the binding posts). how the hell do i hook these up? i must be missing something. anything helpful would be appreciated!

PV Audio
04-09-2005, 05:03 PM
nm i called 'em and got it. frost, u wanna delete it to save space, u can.