PDA

View Full Version : Check my box please?



BoNkA
04-05-2005, 10:50 PM
While I originally wanted to do a ported box, I really don't have the room to make a rectangular box, so I've decided to just go sealed instead.

15" Brahma (.18 ft^3 displacement)
3/4" MDF
Adire rec's 3.5 ft^3 max

height - 15"
width - 30"
depth - 18"

Going to double up the MDF on the top to help support the sub (firing up).

Here is the calculation:

( (15-2.25)*(30-1.5)*(18-1.5) / 1728 ) - .18 = 3.2897 ft^3

Should also leave about an inch, at the lowest point, of space between the sub and my hatchback. That should be ok since backpressure is good, right?

BoNkA
04-28-2005, 11:41 AM
Anyone?

LightningStryk7
04-28-2005, 05:48 PM
the volume is correct. And I think 1 inch is fine.