PDA

View Full Version : Need help with port size for 2 RE SX 15's!!!



NeverEnuffBass
03-22-2005, 06:54 PM
Hey what's up everyone? I know that I had said that I would have a pair of Brahmas for this spring but I have yet to hear anyhting about them comming off backorder. I got a sweet deal on 2 RE SX 15's. I will be using these subs for both daily driving and SPL competition so I want to tune it to about 38-40hz. I think the box should be 7.0ft^3 but I'm just not sure about the port size. I would like to put the port in the center of the box in between the two subs rather than on the side. The box will be rear- firing. If someone could help me out with this I'd really appreciate it.

Thanks,
B.J. Curcio

bumpncarstereo
03-23-2005, 08:27 AM
i think the box should be a little bigger, like 8 cubes, 4 for each sub. ( did you rember to add volume for port and woofer displacement) i know for a 4 cube box for one 15"sx the port is:
26.5 x 4 =45 hz
26.5 x 13 = 32 hz

that was from a RE dealer, using Bass box pro 6 (or something like that)

NeverEnuffBass
03-25-2005, 12:14 PM
Thanks man. Can anyone else help me out with maybe a port tuned to 40hz?

80INCHES
03-25-2005, 12:24 PM
i'm making my port 60square inches and 14 deep and my 2 sx15's will be in a bandpass box..tuned at 63hz.....with a orion 1200d going to the box

80

WMStateChamp18
03-26-2005, 05:23 PM
i have 1 15sx can any one give me a box design for 1 15 sx ported and what to port it at also?