PDA

View Full Version : Here is a box plan...can someone tell me the effective area, and port tuning?



deaf16
03-15-2005, 06:59 PM
The plan is at this link...thanks



http://memimage.cardomain.net/member_images/11/web/731000-731999/731778_3_full.jpg

bhsswrstlr
03-15-2005, 07:49 PM
dont stuff the port with polyfill, thats a bad idea.

saywhat?
03-15-2005, 07:58 PM
gosh diggity dog silver spur rodeo at the big port.

ANeonRider
03-15-2005, 08:06 PM
What is with the angled port entry? Won't that just choke the port out?

deaf16
03-15-2005, 08:09 PM
I did not build the box, it was already built when I bought it with my sub, these are the plans the guy gave me that he made up before he made the box...anyone know what the volume and tuning frequency would be?

swimfreak26
03-15-2005, 09:30 PM
Looks like it may be a transmission line box with the angled port.....

Can someone verify that?

deaf16
03-15-2005, 09:40 PM
The guy told me its supposed to be like a snail shell...all I know is that it sounds hella Low and not very good...just trying to figure out the tuning and air volume

req
03-15-2005, 10:27 PM
definatly some kind of rear loaded transmission line box that he is attempting to make it think that is aeropoedic with polyfill.

i dunno - if it gets hella low, why does it sound so bad? what speaker are you using with it? theres no way i can give a tuning for that - ive not even looked into folded horn box design.

deaf16
03-16-2005, 07:56 AM
Sub is an SX 15 ...so Its not the sub thats making it sound bad, the box seriously sounds like it is either tuned way too low...maybe the box is just too small? Im going to try to take out the polyfill that he had in there today, and test it out...thanks

swimfreak26
03-16-2005, 08:12 AM
The sub is probably the problem. A properly built TL box only sounds good with certain drivers...namely those with extremely low Fs, Qts, and Qes.