PDA

View Full Version : Width on 3 Tens



JoseMCeee
03-11-2005, 10:42 PM
Sup webolizations. Endubadibaly I need a quick oppinion. I gizzot like 35 wizzith, 14 hizzeight, and unlimited depth. <- Well enuff to clizzear the cubic requirement. Is this enuff for 3 tens? Fashigady :veryhapp:

DBfan187
03-11-2005, 10:51 PM
http://img63.exs.cx/img63/4664/image3jh.gif

puppie_chow
03-11-2005, 10:54 PM
yes it's enuff, happy?

JoseMCeee
03-11-2005, 10:56 PM
ok seriously tho. Will 35 be enuff? I wanna keep the front flat tho. No hexagon thing. I was thinking since I have 14 height i could mount the middle ten a little higher than the two bottom.

JoseMCeee
03-11-2005, 10:58 PM
Moe Lester Get Online!!

Primo
03-11-2005, 11:22 PM
Sup webolizations. Endubadibaly I need a quick oppinion. I gizzot like 35 wizzith, 14 hizzeight, and unlimited depth. <- Well enuff to clizzear the cubic requirement. Is this enuff for 3 tens? Fashigady :veryhapp:

you are gizay.

80INCHES
03-11-2005, 11:28 PM
yes it will be enough.......even if u had 11 inche speakers ....it will be enuf

80

JoseMCeee
03-12-2005, 12:15 AM
but what about the space in between the subs? Like where they are screwed. Will those piece come out too thin?

DirtySchemer
03-12-2005, 12:22 AM
It should be braced between the subs anyway.... a 14x35 panel is begging for bracing, even if you only had one sub on that panel.

JoseMCeee
03-12-2005, 12:34 AM
as in makin the chambers separate?

bigred78797
03-12-2005, 12:39 AM
In my setup i had 38" I fit 3 10's in with much room to spare + a port, i was working with about the same hieght too. So yes you do have enough room for 3 10's

DirtySchemer
03-12-2005, 12:45 AM
as in makin the chambers separate?

Separate chambers arn't necessary, and you're better off with one common chamber for a ported application. But you should still have some form of bracing. Use a divider just like it was a separate chamber, but cut out some of the meat so that air can freely pass through. It should end up looking like a +. Or you can just use a 3" or bigger hole saw and put a bunch of holes in the dividers.

supa_c
03-12-2005, 01:02 AM
Bracing is overrated
Dont believe me, ask Mrray13 ;)

iamamp3pimp
03-12-2005, 10:21 AM
http://img63.exs.cx/img63/4664/image3jh.gif




LMFAO


thats the funniest thing ive seen in a minute here


**** LOL

JoseMCeee
03-12-2005, 10:31 PM
^fashigalo. But anyways I think i would be too lazy to brace dat shieeet. By the way this is gonna be a sealed box.