View Full Version : Best way to affix plexi/lexan windows

02-28-2005, 09:32 PM
So ive been going through some threads and gettin some ideas. I did a nice little sketch for you guys. The box has a divider and im looking to add a 12"x12" window on each side above the sub. Which would you run for my setup.

Ported Box and 2 Resonant Engineering SX12's tunes to 32Hz


02-28-2005, 09:41 PM
Flush it with two peices of MDF.

02-28-2005, 09:44 PM
Ya, I figured that was the best way to do it. I have heard horror stories about them not sealing right but I guess as long as I use some liquid nails at the seam and on both face sof the MDF ill be good to go.

I was even thinking abotu using some 1/4x1-1/2" steel plate on both sides instead of the MDF. Not only stronger but more flush with the box wrapping. Plus it will take up less space inside and not affect volume as much

02-28-2005, 11:18 PM
I would go flush mounting as well...be sure to seal it up nice though like you're talking about.