PDA

View Full Version : I have the sealed box specs, what do i need to make it ported?



derek33
02-27-2005, 09:39 PM
So i was starting to put together my sealed box. and after realizing how much work these are (my first box) that i should just go for making it ported.

here are the dimensions:
24" deep -- 16" tall -- 33" wide.

Ive been using a sealed box so far, and i have the subs facing my rear seat in my jeep ( i found it sounds best for me that way) Is it a bad idea to put the ports facing the trunk while the subs face the front?

also, with those dimensions, what size/how many ports should i use, id plan on buying these:
http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=268-352

And this box is for my current/temperary setup, 2 15" mtx 8000's.

I know i am limited due to choosing the box size before i thought about porting it, but im trying to get a frequency of 28-30 hz (lower if possible/recomended). my subs are plenty loud in the car, so im looking for 75% SQ. 15% SPL

derek33
02-28-2005, 09:52 AM
up

derek33
02-28-2005, 04:13 PM
i will also be adding two 3/4 dowels. one horizontal and one vertical.

up

Buckshot
02-28-2005, 06:29 PM
Your ported boxis going to need to be much bigger, then the sealed counterpart... do you have those specs?

derek33
02-28-2005, 06:35 PM
I know ported boxes need to be bigger then sealed, but that box is reletivly big. I dont have the list of stats on my woofer which describe the recomended box size and such, but i know that i was taking a risk by building a sealed box this size for these subs.