PDA

View Full Version : Port calculation???



Buckshot
02-27-2005, 05:46 PM
Alright, someone PLEASE figure out this port. I'm leaving to go get some wood, and I hope itll be here when I come back.

D=16.5"
W=30"
H=15"

I want to tune it to ~30-32 Hz. SQL kinda setup.

Driver vol = .12 Cube

Pleaseeeeeeee help meh!

traksta15
02-27-2005, 05:50 PM
im sort of a newb at port calculations, but these help me out........

http://www.carstereo.com/help/Articles.cfm?id=31

http://www.eatel.net/~amptech/elecdisc/spboxnew2.htm

ANeonRider
02-27-2005, 05:57 PM
www.the12volt.com
www.bcae1.com

req
02-28-2005, 12:15 AM
www.r3q.net/port.html
www.r3q.net/req_files/portcalc.zip (link on the above page is down ATM - so use this one)

bcarpenterfhl
02-28-2005, 12:21 AM
i'll give you the bassbox pro calculation. its usually off by 1-2 Hz., but hardly audible. i'm much too lazy right now to do it properly.

bcarpenterfhl
02-28-2005, 12:23 AM
and what should your port area be?

and what the hell was wrong with your glass box?

ANeonRider
02-28-2005, 12:35 AM
Go for 25in^2

bcarpenterfhl
02-28-2005, 12:50 AM
with the dimensions above, i got a port length of 26.14, width of 1.75, and height of 14.5 for a tuning of 30 Hz. This brings the volume down to 2.79 ft. ^3. this was all done on bassbox pro, so it may be off by 1 or 2 Hz. (Its usually higher than it really is, so its probably somewhere around 32 Hz in reality). hope this helps.

Buckshot
02-28-2005, 03:56 PM
with the dimensions above, i got a port length of 26.14, width of 1.75, and height of 14.5 for a tuning of 30 Hz. This brings the volume down to 2.79 ft. ^3. this was all done on bassbox pro, so it may be off by 1 or 2 Hz. (Its usually higher than it really is, so its probably somewhere around 32 Hz in reality). hope this helps.


Thanks buddy. :+)