PDA

View Full Version : Please check out my box setup for XXX12



Gregory
02-24-2005, 06:30 PM
Gross box volume: 3.55 cubes
NET box volume: 2.5 cubes
Tuning: 32hz
Port Area: 50 in^2
Port: 10 x 4 length: 35" total

Top: 10 x 12 (port side) (1)
Bottom: 12 x 16 (1)
Bottom2: 7 x 16 (After Drop) (1)
Back: 25.5 x 17.5 (1)
Drop parts: 6.75 x 16 (2)
Front Face: 17.5 x 27 (27" is overkill...it'll overlapped, will need to cut down)
Port: (slot port, on top)
PartA: 10 x 19.25 To be mounted underneath top side...
PartB: 10 x 10.25 To be mounted to the side of part A...

4" all throughout the port!...4" from side of box at all times

Next, are a few sketches:
Sides (2 of these):
http://img189.exs.cx/img189/4337/gregorycaraudiosidesketch2ix.jpg

Port side (1 of these):
http://img189.exs.cx/img189/3202/gregorycaraudioportsidesketch7.jpg

For you guys to visualize where it's gonna go:
http://gallery.caraudio.com/vg/1/8/1/4/7/BoxPlansintruckdrawing.jpg

Please note that the 6.5" measurement should be 6.75.

Designed by ngsm13, I trust him 100%, I just want to see what you guys think!

d cha p
02-24-2005, 11:21 PM
looks good. I like the pics. I am also designing a box for a xxx12. Mine will be 3cuft @ 28hz. w/50 in^2 of port. Hopefully they will turn out right.

swimfreak26
02-25-2005, 08:02 AM
Looks great, only one problem I see with it:

Port Area: 50 in^2
Port: 10 x 4 length: 35" total

These two can't possibly both be true.

req
02-25-2005, 08:35 AM
LOL 50in^2?

last time i checked, 10"x4" = 40in^2


otherwise... ngsm does boxes well. so id trust him tbh. ask 2kchevy, his designed by NG slamms :)

ngsm13
02-25-2005, 10:07 AM
LOL 50in^2?

last time i checked, 10"x4" = 40in^2


otherwise... ngsm does boxes well. so id trust him tbh. ask 2kchevy, his designed by NG slamms :)

Ha ha ha!
Sometimes, I'm a dummy...lol. It sure is 40 in^2 :)

NG

PS: thanks for the props!

80INCHES
02-25-2005, 11:18 AM
yeah ng your work looks good..

80
giving props 2 where its due