PDA

View Full Version : (Pioneer 8600) Where the hell are the rca outs?



d cha p
02-08-2005, 10:01 PM
I was trying too install an amp for one of my friends so I took his dash apart, pulled his deck out too find it has no rca outs. It is a Pioneer 8600mp which is one of pioneers top of the line decks. How am I supposed too install an amp if the deck does not have rca outs?

iceteebone
02-08-2005, 10:07 PM
I was trying too install an amp for one of my friends so I took his dash apart, pulled his deck out too find it has no rca outs. It is a Pioneer 8600mp which is one of pioneers top of the line decks. How am I supposed too install an amp if the deck does not have rca outs?


did you look at the back of the deck perhaps? can't see how you can miss them.

d cha p
02-08-2005, 10:09 PM
Not there...

negativezeroz
02-08-2005, 10:10 PM
Audio Features Built-in Speaker Power (http://www.pioneerelectronics.com/pna/product/detail/0,,2076_4039_63891892_tab=B,00.html?compName=PNA_P roductDetailComponent#)MOSFET 50W x 4 Continuous Power Output (http://www.pioneerelectronics.com/pna/product/detail/0,,2076_4039_63891892_tab=B,00.html?compName=PNA_P roductDetailComponent#)22W x 4 Equalizer (http://www.pioneerelectronics.com/pna/product/detail/0,,2076_4039_63891892_tab=B,00.html?compName=PNA_P roductDetailComponent#)13-Band Graphic Equalizer Presets (http://www.pioneerelectronics.com/pna/product/detail/0,,2076_4039_63891892_tab=B,00.html?compName=PNA_P roductDetailComponent#)5 User Equalizer Settings (http://www.pioneerelectronics.com/pna/product/detail/0,,2076_4039_63891892_tab=B,00.html?compName=PNA_P roductDetailComponent#)2 Loudness (http://www.pioneerelectronics.com/pna/product/detail/0,,2076_4039_63891892_tab=B,00.html?compName=PNA_P roductDetailComponent#)Yes DSP (http://www.pioneerelectronics.com/pna/product/detail/0,,2076_4039_63891892_tab=B,00.html?compName=PNA_P roductDetailComponent#)http://www.pioneerelectronics.com/pe/images/feature_type_check.gif Auto-EQ (With Mic Included) (http://www.pioneerelectronics.com/pna/product/detail/0,,2076_4039_63891892_tab=B,00.html?compName=PNA_P roductDetailComponent#)http://www.pioneerelectronics.com/pe/images/feature_type_check.gif Auto-Time Alignment (http://www.pioneerelectronics.com/pna/product/detail/0,,2076_4039_63891892_tab=B,00.html?compName=PNA_P roductDetailComponent#)http://www.pioneerelectronics.com/pe/images/feature_type_check.gif Listening Position Selector (http://www.pioneerelectronics.com/pna/product/detail/0,,2076_4039_63891892_tab=B,00.html?compName=PNA_P roductDetailComponent#)http://www.pioneerelectronics.com/pe/images/feature_type_check.gif BBE Digital (http://www.pioneerelectronics.com/pna/product/detail/0,,2076_4039_63891892_tab=B,00.html?compName=PNA_P roductDetailComponent#)http://www.pioneerelectronics.com/pe/images/feature_type_check.gif Automatic Sound Levelizer (ASL) (http://www.pioneerelectronics.com/pna/product/detail/0,,2076_4039_63891892_tab=B,00.html?compName=PNA_P roductDetailComponent#)http://www.pioneerelectronics.com/pe/images/feature_type_check.gif Electronic Balance/Fader (http://www.pioneerelectronics.com/pna/product/detail/0,,2076_4039_63891892_tab=B,00.html?compName=PNA_P roductDetailComponent#)http://www.pioneerelectronics.com/pe/images/feature_type_check.gif Source Level Adjuster (SLA) (http://www.pioneerelectronics.com/pna/product/detail/0,,2076_4039_63891892_tab=B,00.html?compName=PNA_P roductDetailComponent#)http://www.pioneerelectronics.com/pe/images/feature_type_check.gif Crossover Network (http://www.pioneerelectronics.com/pna/product/detail/0,,2076_4039_63891892_tab=B,00.html?compName=PNA_P roductDetailComponent#)3-Way Crossover High-Pass Crossover (HPF) (http://www.pioneerelectronics.com/pna/product/detail/0,,2076_4039_63891892_tab=B,00.html?compName=PNA_P roductDetailComponent#)50/63/80/100/ 125/160/200Hz, 0/-6/-12dB/Oct. Subwoofer Crossover (LPF) (http://www.pioneerelectronics.com/pna/product/detail/0,,2076_4039_63891892_tab=B,00.html?compName=PNA_P roductDetailComponent#)50/63/80/100/ 125/160/200Hz, -6/-12/-18dB/Oct. RCA Preouts (http://www.pioneerelectronics.com/pna/product/detail/0,,2076_4039_63891892_tab=B,00.html?compName=PNA_P roductDetailComponent#)3 pair (Front, Rear, Sub/Non-Fading) Preout Voltage & Impedance (http://www.pioneerelectronics.com/pna/product/detail/0,,2076_4039_63891892_tab=B,00.html?compName=PNA_P roductDetailComponent#)Hi-Volt (4V), 100 ohm

READ THE BOLD ;) k thanks

Randy Savage
02-08-2005, 10:11 PM
They are probably chassis mounted on the back of the radio...did you actually look at the back of the radio, or just look for the RCA's coming out of the back?

d cha p
02-08-2005, 10:16 PM
I physically took the deck out, turned it around and looked at the back with my own two eyes and it has no rca pre outs.

iceteebone
02-08-2005, 10:16 PM
take a pic of the back of the deck

d cha p
02-08-2005, 10:20 PM
the rear rca's are on a wire, and the other 2 are near the antenna input.
ahh... so they are in the harness?

teqnek
02-08-2005, 10:20 PM
i have the same deck, but the premier version 860mp. the rca's are a whole separate wire you have to plug into the deck. lemme get a pic of it and ill show you.

stunnersdad
02-08-2005, 10:20 PM
The 8600 has another plug that all the RCA's are on. When he installed his deck he didn't plug that plug into the deck. Its a small white or light grey harness that goes next t the main harness. So he needs to find that.

d cha p
02-08-2005, 10:26 PM
thanks guys.

teqnek
02-08-2005, 10:27 PM
here ya go, the red is the one you're looking for. if he lost that part you would have to get it from pioneerelectronics.com or from ebay.
http://img.photobucket.com/albums/v208/teqnek/rca.jpg

it looks like this
http://parts.pioneerelectronics.com/images/part/CDE7436_M.jpg

iceteebone
02-08-2005, 10:28 PM
ahh... so they are in the harness?


my bad. i was thinking of my old premier 750. but yea there should be a harness with them.

maylar
02-10-2005, 04:37 PM
$26.85 from Pioneer if you can't find the one that came with it...

http://parts.pioneerelectronics.com/part.asp?productNum=CDE7437

d cha p
02-10-2005, 05:34 PM
Thanks for all the help guys. The piece that we needed was in the box that the deck came with so it is all installed now. Iím going too make a post about his car in a couple days, with pics.