PDA

View Full Version : Has anyone used or heard these DLS 7"x10" speakers?



Intercooler
01-17-2005, 08:44 AM
These: http://www.dls.se/english/speakers/1070.htm


They seem pretty neat. A bigger speaker in a smaller opening. How much difference does it make in sound having the X-over? Reason I ask is I am leaning towards the Boston SL-95's (sound good) but they don't have a X-over. Even the Polk's I looked at had a X-over. What does having the X-over allow you to do with a speaker like this?

req
01-17-2005, 08:54 AM
just FYI;

coaxial speakers have a midbass speaker and an integrated tweeter. ther is a *crossover* but its not exactally the same. if you look, there are tiny capicators on these speakers to 'cross over' the tweeters at a higher frequency (aka - lowpass filter) generally, these are the speakers sold at stores and come standard in cars.

component speakers have seperate crossovers, midbass, and tweeters. they are more complicated to install, because there are three parts to wire and mount versus one, but the imaging (direction of sound) and sound quality are more dynamic (because you can aim them and move the tweeters around, and wire the tweeter and\or midbass out of phase [in reverse] to match the opposite speaker - better sound if done right). they can usually handle more power, and are more often than not, higher quality.

and on top of that;

round speaker > non round speaker = better sound quality.

oval speakers (6x9, 5x7, 4x6, 7x10) and the likes, have inherent noise because the cone is different shape and weight and all kinds of weirdness, and has a better chance of being a non-linear movement (higher distortion) versus a round speaker. they are usually, as stated, lower quality, and are not as good in most cases.

i would highly recommend not getting coaxial unless you know what you are buying, or you have no idea what you are doing with a component set.

if anything was wrong in my post - nick, squeak or anyone, please correct me. (its kinda eairly)

profilepower
01-17-2005, 09:08 AM
sorry those speakers wouldnt touch my jvc 6x9s...3 way
they might beat mine alil on the high end.. but fail on power max. n the low end n tie 93 s/n......

req
01-17-2005, 09:17 AM
sorry those speakers wouldnt touch my jvc 6x9s...3 way
they might beat mine alil on the high end.. but fail on power max. n the low end n tie 93 s/n......

dude. shut the hell up. you have no idea about anything that isnt '7 years old'

or so you claim.

just give it a rest you fat old man who wants attention because your dog wont even lick the peanutbutter anymore.

//edit

dont listen to this guy. he is an idiot. :silly:

profilepower
01-17-2005, 09:33 AM
7yrs old...oohh no..these jvc bronze 6x9s i bought 2 months ago......you must be confussed....
i do have some boss amps 4 yrs old.....sherwood amp 12 yrs old...no, no nothing 7 yrs old lil boy....

req
01-17-2005, 09:41 AM
whatever guy. you **** at life.

and for future refrence people, dont listen to this guy. he has no idea what he is talking about.

Intercooler
01-17-2005, 10:38 AM
Those speakers are only like $70.00 for a pair. Are they that good?

req
01-17-2005, 11:06 AM
Those speakers are only like $70.00 for a pair. Are they that good?

did you even listen to me :popcorn:

profilepower
01-17-2005, 11:10 AM
which are $70 my jvc or his?????jvc is way under $70

Intercooler
01-17-2005, 12:19 PM
The JVC's. Yea.... I listened. I just wanted to see what he was basing his info on.

profilepower
01-17-2005, 12:24 PM
my information???? you mean my specs???
i base my specs on the writing on the box...

ighettoboyi
01-17-2005, 12:33 PM
can we delete thsi thread please

johnecon2001
01-17-2005, 12:53 PM
the DLS's will spank those JVC's..no contest. Ask any one whose used DLS before and you'll get the same answer.

chubby
01-17-2005, 01:36 PM
dls>jvc

profilepower
01-17-2005, 03:35 PM
ok..i guesss its possible.......not likely thou

Johnny Drama
01-17-2005, 03:54 PM
DLS>Any JVC

djdilliodon
01-17-2005, 04:35 PM
JVC<this thread :(