pwnt by pat

01-12-2005, 01:14 AM

I got $10.30 in paypal and it'll go to whoever designs me a box.

The outer dimensions need to be 38.5 wide, and 16 deep, 15.5 high. The 15.5 is the sub side - cut diameter is 14.125 so it should fit. The sub is a 15 sexx. Tuning frequency is 27hz. I'd like to have the internal volume be in the range of 2.5 to 3.5, whatever it takes to get the box to these dimensions at this frequency. Square port or round port, doesn't matter as long as I know what to use for the port if it's round. I'm not sure on any of the paramaters, though.

I also would like to have the sub centered in the box, if possible. If you need any more info, just ask.

Kthx and let the math-a-thon begin!

The outer dimensions need to be 38.5 wide, and 16 deep, 15.5 high. The 15.5 is the sub side - cut diameter is 14.125 so it should fit. The sub is a 15 sexx. Tuning frequency is 27hz. I'd like to have the internal volume be in the range of 2.5 to 3.5, whatever it takes to get the box to these dimensions at this frequency. Square port or round port, doesn't matter as long as I know what to use for the port if it's round. I'm not sure on any of the paramaters, though.

I also would like to have the sub centered in the box, if possible. If you need any more info, just ask.

Kthx and let the math-a-thon begin!