PDA

View Full Version : what type of material/wood should I make...



cjj2d
01-09-2005, 10:32 AM
a speaker baffle/mount for my doors with? I have to make one to hold a 5.25" midrange.

Damaso87
01-09-2005, 10:58 AM
3/4" Mdf

Moe Lester
01-09-2005, 10:59 AM
some thin MDF is fine... 3/8 if they have it, or 1/2

cjj2d
01-09-2005, 12:08 PM
went and got some 1/2" mdf.

also got some RV GOOP to glue/seal my weather strip onto my door better. It is connected to the door with pins every 6" or so. So there are gaps that let water in. I have been trying to figure out where the water was coming from in my doors and so I took it to the car wash and immediatly after I was done I opened my door to see where it was coming from. Now all I have to do, I hope, is seal this sucker up and it will be fine.

jtomsic
01-09-2005, 12:12 PM
your going to get a little moisture in there no matter what u do.