PDA

View Full Version : need help with my box for 4 re sx 12s



midwestcustoms3
01-05-2005, 01:16 AM
need to figure out how big of a port i should use on this box. here r the deminsions of the box

w = 36
h = 30
d = 21 this gives me 11.09 cubes, so hopefully after sub displacment and port displacment should bring me down to 10 cubes (guessen)

so i need to know how many sq. in. of port and length i should use and what i should tune this to. this is going in a saturn vue (suv)if that helps ne.

ne help would be appriciated

bcarpenterfhl
01-05-2005, 01:34 AM
the port will have to be more than 1 ft. cubed.

TimberJon
01-05-2005, 10:56 AM
http://www.bcae1.com/spboxnew2.htm <--- plug in all your figures in the appropriate calculator. Make sure that you have ALL the stats on your subs that you can get your hands on.

There is a PORTED box calculator about 1/3 the way down this page.

midwestcustoms3
01-06-2005, 09:45 PM
coo i will try it and see what happens
bump

SPLguy420
01-11-2005, 08:03 PM
that should really fkin slam. what u using to power it?

DBfan187
01-11-2005, 08:08 PM
I'd go for atleast 120"sq. of port. 30Hz

thumper1232004
01-12-2005, 12:10 AM
Hey guys whats up i got a ford ranger and its an extended cab i need some box ideas does any of you got any plans or ideas for 4 12" infinity subs my gallery is in the members gallery area i have pics of my boxes and subs

ngsm13
01-12-2005, 12:14 AM
need to figure out how big of a port i should use on this box. here r the deminsions of the box

w = 36
h = 30
d = 21 this gives me 11.09 cubes, so hopefully after sub displacment and port displacment should bring me down to 10 cubes (guessen)

so i need to know how many sq. in. of port and length i should use and what i should tune this to. this is going in a saturn vue (suv)if that helps ne.

ne help would be appriciated

I'm bored...hit me up if you want me to design you a good one! peace

NG

midwestcustoms3
01-15-2005, 03:00 PM
spl im using a rf power t20001bd to power them now but im looking to get a second one also.

pmed u on a box design also ne help would be great

jellyfish420
01-15-2005, 03:12 PM
I'd go for atleast 120"sq. of port. 30Hz
have you ever recommended less that 100"sq. port???;)
oh well...i like big ports too:)

Acidburn
01-15-2005, 03:32 PM
ports are like boobs, you can never go too big

jellyfish420
01-15-2005, 03:40 PM
oh ya...i like big boobs too:):):):):):):)

DBfan187
01-16-2005, 12:53 PM
have you ever recommended less that 100"sq. port???;)
oh well...i like big ports too:)

Ofcourse not! Where's the fun in a small port?;)

I like 15-25"sq.in. of port for every cubic ft.

ttsquared100
01-18-2005, 11:22 AM
post a dB when ur done i was gonna do a direct swap from 4 kicker cvr's but i need my trunk space back so i cant do it need alot more power...ur electrical system is gonna be shot...do the big 3...