PDA

View Full Version : 1.75 in.?



Basshead808
12-30-2004, 04:48 PM
Hey guys, I am terrible at measuring I am making a 3.16 cu ft. ported box built to JLs specs, so where is 1.75 or .75 in. on a tape measure?

Nikuk
12-30-2004, 04:54 PM
ROFL


4th line BEFORE the 2.

Basshead808
12-30-2004, 04:57 PM
lol okay thanks alot man

Nikuk
12-30-2004, 05:11 PM
No Prob...

Good luck.

mobileaudio219
12-30-2004, 05:48 PM
You can buy an E-Z Read tape measure at wal-mart for around 8 bucks... Oh, and good luck on the box...

g30ffr3y
12-30-2004, 06:45 PM
You can buy an E-Z Read tape measure at wal-mart for around 8 bucks... Oh, and good luck on the box...


he'll need it if he cant figure out the 3/4 mark...

lets hope its not a vented box hes building...

jtomsic
12-30-2004, 06:48 PM
:wowflash: what a retard :wowflash:

mobileaudio219
12-30-2004, 08:57 PM
lol, thats not very nice... Maybe he was just really drunk?

Basshead808
12-30-2004, 10:08 PM
lol, yeah now I get it, so it acts like quarters 1/4 = .25 in. 2/4 = .50 in. 3/4 = .75 in and 1 whole = 1 inch, dang I knew that people, I didin't measure for a while so I forgot lol, my brain is not functioning correctly today, I maybe will build a box this weekend or so, I will post up some pics of the finished product, thanks guys, im going to need the luck lol if you know what I mean

Damaso87
12-30-2004, 11:10 PM
three divided by four is .75 ... two divided by 4 is .5 .... simple enough.

Basshead808
12-31-2004, 02:49 AM
okay, I got rid of that measure image, and thanks again NjccBflo for helping me out, and thanks to all

radel2dope
12-31-2004, 05:25 PM
Haha lay off, he didnt post to get flamed, just needed some help