PDA

View Full Version : Anyone have any experience w/ ID-CX62?



Hypnoz
12-28-2004, 01:05 PM
Thinking about picking up a pair. How do they sound?

audiolife
12-28-2004, 01:42 PM
if you know how to build a good kick panel those speakers are very hard to beat

Hypnoz
12-28-2004, 05:49 PM
Never done it before, know of any online instructions?

iceteebone
12-28-2004, 06:29 PM
Never done it before, know of any online instructions?


http://www.caraudio.com/vb/showthread.php?t=38665

i just ordered a set of those. from what i have heard on them they are pretty decent. i only found one person who didn't like them. sounddomain has them for $160 shipped. they are the only authorized online dealer for image dynamics.

Hypnoz
12-28-2004, 07:00 PM
any other way besides FB? LOL that looks pretty tedious

Also - how would Koda's compare to these?

iceteebone
12-28-2004, 07:48 PM
any other way besides FB? LOL that looks pretty tedious

Also - how would Koda's compare to these?


there is q-logic kicks but good luck trying to get 6.5's to fit. a lot of people don't like q-logic but they work pretty well for my 5.25 set. i'm gonna throw these ID mids in my doors and see what happens. from what i hear the koda's are pretty nice. but also take into consideration that the koda's are 4 ohms whereas the id's are 2 ohms, therefore more power will be sent to the id's.

audiolife
12-28-2004, 08:33 PM
a propper install with the id's will produce 20-20k in a good kick panel. they sound pretty good too.

iceteebone
12-28-2004, 08:36 PM
a propper install with the id's will produce 20-20k in a good kick panel. they sound pretty good too.


what about a good door install?

audiolife
12-28-2004, 08:54 PM
for the set? it would be ok but it wont image very well even cdts i can point out in doors lol

Hypnoz
12-29-2004, 01:04 AM
im just trying to find the best dedicated midbass possible for around $200.

Want it to be able to play kicks FLAWLESSLY. ( the initial kick of the drum, obviously a subwoofer plays the rest). Also want accented bass lines and guitar. What other suggestions?

audiolife
12-29-2004, 05:42 AM
alot of speakers will do what you ask, but the problem isnt the speaker its the install. if you just slap a speaker into your door and it sounds "perfect" you got lucky. describe your install, will the speaker be enclosed?if so how big is the encloser? working ib in a door? will you seal the front of the speaker from the back really good? can you tune it and adjust it to do the very thing you want? (meaning do you have an eq that will allow you to fine tune that area) once you soved these questions pick out a few drivers then call the manufacturer for support to see if it is indeed the best driver for u. the reason why people have good luck and other people have bad luck with the same drivers is because somewhere in the questions i asked the variables have changed between users.

Hypnoz
12-29-2004, 11:47 AM
Well i can put it in whatever enclosure i need, but it must be a box style, i dont do Fiberglassign and it doesnt look fun to me. I have an avionixx 440.4, will be running off of rear 2 channels for 125w @ 2 ohm each. Then i will LPF them at max (250hz) then LPF them at like 80hz or 100 hz.

themainjam
12-29-2004, 11:51 AM
fiberglass isnt that hard :) i am doing it right now. for the first time. just dont mix in too much hardener because that **** gets hot!!.

rocchi
12-29-2004, 04:16 PM
Stick with the orion P-series.