PDA

View Full Version : Box plans. Correct? JMAC u out there?



JoseMCeee
12-10-2004, 01:34 AM
This is going to be with .75 mdf wood. 2.3^3 @ 32 hz.

26 width x 14.5 height x 14 depth.

Port lenght of 29.75. It will go 11.5 in toward the back of the box, then 18.25 toward the side of the box.

Is this right? :banghead:

JoseMCeee
12-10-2004, 11:08 AM
29.16x13.5x15 (wxhxd)

Port: 12x2.5 (heightxwidth) = 30 sq in
29.75 inch port lenght

JoseMCeee
12-10-2004, 08:52 PM
sound good? I might want to take off a little on the depth because and add it to the width, ima try that now... :wacky:

JoseMCeee
12-10-2004, 09:03 PM
32x13.5x13.7 Thats the same amount or cube ft.

What ft^3 would it be with 32x13.5x13.5 after taking into acount the thickness and all the other stuff?

brandontw
12-10-2004, 10:33 PM
you can calculate it..dont be lazy

JoseMCeee
12-11-2004, 01:24 AM
well im not sure how to factor in the driver displacement and port displacement. By the way Jmac hit me up on aim if you can :greedy: