PDA

View Full Version : final box volume



rick22
12-08-2004, 08:49 PM
I know this is a dumb question but do you subtract the subs displacement from the volume to get the final volume. my sub displaces 1.9 cuft so would that mean i would need a 3.9 cuft box to get it to be 2 cuft. im sorry i just cant remeber which way it is and i dont want to screw up. thanks alot

bonesninja
12-08-2004, 08:50 PM
wow thats quite a bit of sub you got there

rick22
12-08-2004, 09:01 PM
dont you multiply the sd by the xmax to get the displacement which would be .08*24.

bonesninja
12-08-2004, 09:10 PM
i think it would be closer to .19 than 1.9 cube. i don't know of an exact formula or anything but i'd bet all my money it ain't anywhere close to 1.9 cubic ft.

brandontw
12-08-2004, 09:57 PM
1,9 cube sub huh thats beefy lol

bcarpenterfhl
12-09-2004, 12:02 AM
sure its not 1.9 cubic liters?

rick22
12-09-2004, 11:51 PM
ok thanks. im sure i sound pretty dumb its just the last box i built i had the plans made for me so i didnt have to do the calculating but this time since im doing a sealed box i figured id just do the calculations. 24.5*16*14 is 5488 then i do 5488/1728 to get 3.17cuft so the actual box would be 26*17.5*15.5 does all this seem right? im pretty sure thats right but now my trouble is what the actual size will be with the sub. the sub is the mag d2 15". i want the box to be at least 2.5 cuft after the sub is accounted for. will it be. thanks again and sorry if all this seems dumb.

rick22
12-12-2004, 03:12 PM
thanks alot for the help