PDA

View Full Version : new box



B@SSAN8OR
12-01-2004, 09:07 PM
hey this is a box we are working on it is almost done. and it hits really hard in the truck with 3 15's.



http://home.comcast.net/~devinwolery/files/donniebox.jpg

http://home.comcast.net/~devinwolery/files/donniebox2.jpg

bonesninja
12-01-2004, 09:09 PM
it's definately cool looking--is that a mirror on the back wall? does that box rattle like crazy--seems like it would to me but pretty sweet lookin tho.

DBfan187
12-01-2004, 09:09 PM
ohhhhhh that pretty. Is it ported? If so, what tuning?

B@SSAN8OR
12-01-2004, 09:14 PM
it is a sealed box that has bent plexi and mirror on bottome sides and back along with bent flames on the bottom and back. then flame grill.

it is 3 15in mtx 7500 wired in parallel into a mtx 1501D amp at 1.3 ohm

we are running 1/0 gauge wire to the amp.

B@SSAN8OR
12-02-2004, 03:34 PM
here is the amp rack on the back of the box. it is enclosed in vinyl.

http://home.comcast.net/~devinwolery/files/donniebox3.jpg

BASS OUTLAW
12-02-2004, 03:51 PM
i want that box ;)

Boosted92HB
12-02-2004, 05:55 PM
it is 3 15in mtx 7500 wired in parallel into a mtx 1501D amp at 1.3 ohm

1501D's are only 2ohm stable ya know... I would hate to mess up such a nice amp!

DBfan187
12-02-2004, 07:45 PM
1501D's are only 2ohm stable ya know... I would hate to mess up such a nice amp!
If you keep a steady 14.v to them, they can run @ 1ohm unmodded w/o issues.

B@SSAN8OR
12-03-2004, 03:43 AM
stop lookin at the F*ckin manual you can run it at 1 ohm stable if you want. if it blows up then you have a 3 year warranty with them