PDA

View Full Version : This is a knuckle head question but....



reed8857
11-29-2004, 05:45 PM
Mounting Diameter (top mount) : 275mm (10-7/8”) (from the subs manafacture site) Do I cut the hole that big or do I leave a half inch for mounting.

vosschs
11-29-2004, 05:48 PM
cut the hole at that then it should fit perfect

Nikuk
11-29-2004, 06:23 PM
cut the hole that big.

if you are flush mounting you need a hole that big to the interior of the box and a hole the outer diameter on the exterior of it.

reed8857
11-29-2004, 06:28 PM
cut the hole that big.

if you are flush mounting you need a hole that big to the interior of the box and a hole the outer diameter on the exterior of it.


Got the first part, completey lost on the second....none of yall would guess I am MI would you...lol

TimberJon
11-29-2004, 06:52 PM
He means...

Basically, this would be the first one.
"===" designates fiberboard.

.....│______________│ <-- your sub basket/grille goes on top.
=====│_________│====
=====│_________│====

by the SECOND one. If you want your grille or basket BENEATH the top of the wood, you need to make the wood double thick (usually)(with screws and woodglue or equivalent) And cut the SAME size hole, but using a router and jig or a HUGE holesaw (if you can find one)... Cut a LARGER hole above the first one.

===_______________===
===│_____________│=== This would be flush mounted.
=====│ ________│=====
=====│ ________│=====

Merry Christmas.

Nikuk
11-29-2004, 06:52 PM
MI?

Just stick with a 10 7/8" hole :)

*thanks jon

reed8857
11-29-2004, 09:20 PM
MI= military intelligence

Nikuk
11-29-2004, 09:37 PM
LoL... that requires the bigger parts of your brain... so dont feel bad!